ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Audio Snakes  (Read 490 times)

John Bryan

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Audio Snakes
« on: September 13, 2018, 01:58:49 pm »

We have a snake which runs from the front of our sanctuary (behind the choir loft in a small room) to our media room in the rear. To accommodate our praise instruments, we ran a new snake from the front of the pulpit to inputs on the existing snake. We have wireless guitar receivers input into the new snake. Our problem is this, when the guitar receivers are plugged in and turned on, the faders on the mixer for the guitars affect the volume on other inputs from the original snake. When we turn off the guitar receivers it goes away. When the guitar receivers are plugged into the original snake inputs, we don't have a problem. Plugging into the original snake is not an option due to its location. Any answers? We use a PreSonus StudioLive mixer. I have wondered if running a snake into another snake might be the problem or if we are getting some sort of feed from the wireless guitar receivers but we have wireless mic receivers plugged into the original snake with no problems. All frequencies have been checked and no duplication. Please don't ask why it's set up as it is. It was done by a former "expert" who didn't think Shure wireless mics would transmit 50'.
Logged

Dave Garoutte

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1849
  • San Rafael, CA
Re: Audio Snakes
« Reply #1 on: September 13, 2018, 03:09:29 pm »

Does it effect the guitar input AND other inputs?
Or just the wrong input.
If it's just the wrong one, re-patch to make it right.
It's possible one of the snakes is labeled wrong.
Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.

ProSoundWeb Community

Re: Audio Snakes
« Reply #1 on: September 13, 2018, 03:09:29 pm »


Pages: [1]   Go Up
 



Page created in 0.054 seconds with 23 queries.