ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Multirack Native & Recording for Playback  (Read 534 times)

Dennis Frazier

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Multirack Native & Recording for Playback
« on: September 03, 2018, 07:04:43 pm »

Hi All!

Long time reader, first time poster.

I use DiGiCo SD series consoles at my local church and as an on-site FOH contractor around the country. I've been using a Soundgrid Impact Server for a few years now but it just recently bit the dust. Until I'm able to get another, I will be using Multirack natively on my laptop. My setup uses an MBG interface and network switch. Multirack Native is working fine, but I'm having problems getting the DAW on a second Mac to receive audio for recording. The DAW sees the Soundgrid Driver and Soundgrid Studio recognizes both computers. Am I missing something? Can I use Multirack Native on one computer and Record/Virtual on another? With the Soundgrid Server doing the processing, this was never an issue. Thanks for any help!
Logged

DavidTurner

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 318
Re: Multirack Native & Recording for Playback
« Reply #1 on: September 04, 2018, 11:04:26 am »

You should post this on the Digico Users group on Facebook. I have gotten prompt responses to my questions there.


Sent from my iPhone using Tapatalk
Logged

josh allman

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 50
Re: Multirack Native & Recording for Playback
« Reply #2 on: September 09, 2018, 04:31:54 pm »

Are you using soundgrid studio for the patching? You have to set up the device to device patching


Sent from my iPhone using Tapatalk
Logged

ProSoundWeb Community

Re: Multirack Native & Recording for Playback
« Reply #2 on: September 09, 2018, 04:31:54 pm »


Pages: [1]   Go Up
 



Page created in 0.236 seconds with 23 queries.