ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Midas DL16 noisy channel...  (Read 859 times)

Nick Enright

  • Full Member
  • ***
  • Offline Offline
  • Posts: 241
  • Detroit, MI
Midas DL16 noisy channel...
« on: August 15, 2018, 12:21:07 PM »

Is this just a defective channel?

Anyone else seen this failure mode?

brand new, first gig.

Connected to M32r, ch 14 on the DL16 is noisy. Also noisy in SN master mode.

Reset and checked firmware updates. Different CAT5e cables checked, Shielded/non doesn't matter.

Level of Noise changes with the pre-amp gain.

noise is about 30db down on a line level signal.


thanks!


PS: I'm Obviously going to be in touch with my dealer for replacement.
Logged
Nick Enright
Owner / Engineer
Lyve Productions
Detroit, MI

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23782
  • Wichita, Kansas USA
Re: Midas DL16 noisy channel...
« Reply #1 on: August 15, 2018, 12:32:42 PM »

Is this just a defective channel?

Anyone else seen this failure mode?

brand new, first gig.

Connected to M32r, ch 14 on the DL16 is noisy. Also noisy in SN master mode.

Reset and checked firmware updates. Different CAT5e cables checked, Shielded/non doesn't matter.

Level of Noise changes with the pre-amp gain.

noise is about 30db down on a line level signal.


thanks!


PS: I'm Obviously going to be in touch with my dealer for replacement.

Return it for exchange, it's defective.
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

ProSoundWeb Community

Re: Midas DL16 noisy channel...
« Reply #1 on: August 15, 2018, 12:32:42 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.03 seconds with 23 queries.