The unit keeps freezing up and we don't have any more in the shop. I'd like to open this guy up to make sure all connections are seated properly but I can't figure out how. I'm sure that's how it was designed.
There are 4 screws that clustered underneath, not on the perimeter. I don't want to unscrew them because I'm guessing that they are securing the motherboard. I could be wrong about that just wondering if anyone has had to open one of these up.
Thanks.
TO OEPN IR 360.... Caution*** Can be difficult to get back together.First to open an INSTANT REPLAY you will need the following tools
· 5/16 nut driver or socket with an extension and ratchet
· A flat blade screw diver
· A Philips screwdriver
First remove the 3 rubber feet on the bottom front of the I/R with the flat blade screw driver, Once the feet have been removed use your 5/16 nut driver or socket with the extension to remove 3 nuts that are inside the I/R. Once you have removed the 3 nuts tilt the top panel open and push the chassis away from you and pull the top panel towards you. After you’ve unplugged all the cables from the main board use the Phillips screw drives to remove the 4 screws on the bottom center of the I/R to remove your hard drive.