ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Yamaha CL5 - I need multi talkback  (Read 503 times)

Maria del Mar

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
  • Maria del Mar
Yamaha CL5 - I need multi talkback
« on: September 11, 2018, 12:28:02 pm »

Dear people: I have the following situation. I need to feed 4 audio/telephone interfaces inputs with any 4 buses from the console..... is easy!!!, isn't it? , but I alsp need to give orders/talkback to any of those buses independiently "one each a time" so when I press the button to speak I want that the foldback signal will be dimmed or interrupted, in other words, and IFB function.

I need to make 4 IFB with an only external mic plugged (in ex, OMNI8 IN) to speak to the mixes MIX21, MIX22, MIX23 and MIX24. I know that I could use the user defined keys to program function buttons etc, but I coudn't find any function to interrupt or dim the FB signal when I want to speak to those buses.

Any suggestions for doing with the internal functions of this CL5 console?

regards, Martin
Regards, Maria del M.

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1461
    • Check Check One Two
Re: Yamaha CL5 - I need multi talkback
« Reply #1 on: September 11, 2018, 03:25:49 pm »

You’ll need to update your username on the forum to your full real name.

Sent from my iPhone using Tapatalk Pro

"Well, my days of not taking you seriously are certainly coming to a middle..."
Saving lives through Digital Audio, Programming and Electronics.
Pages: [1]   Go Up

Page created in 0.041 seconds with 23 queries.