ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Yamaha firmware update  (Read 5474 times)

Nathan Salt

  • Full Member
  • ***
  • Offline Offline
  • Posts: 112
Re: Yamaha firmware update
« Reply #10 on: August 01, 2018, 07:27:04 PM »

I'll be updating purely for the axient d control
Logged
Nathan Salt

Miguel Dahl

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 548
Re: Yamaha firmware update
« Reply #11 on: August 02, 2018, 05:58:31 AM »

This is strange. In addition to the QL5 which doesn't show name sub anymore, the CL3 has stopped recalling output routing.

When i fired it up again i saw that there was no output routing. If I route for instance MX1 to the first output of the RIO then it stays like that even if i load new scenes.
Logged

Aram Piligian

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 89
Re: Yamaha firmware update
« Reply #12 on: August 02, 2018, 08:46:57 AM »

The threshold range on the virtual 5045 is -42 to -12dB, Yamaha scale where 0dB is the hard ceiling. So you still need to have a strong signal coming in.

Thanks for the info!
Logged

Miguel Dahl

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 548
Re: Yamaha firmware update
« Reply #13 on: August 06, 2018, 10:55:53 AM »

I feel I have to ask this to get it out of the "unsure"-zone. I've called my local reps but they are on vacation and I like to keep someones vacation sacred, especially in this business.

On the CL the sub-firmware-version shows when you press SETUP, and look at the different firmware versions. On CL I can read Main FW, SUB, and DANTE FW.

On the QL I can read Main and DANTE, but not the SUB. From everything I've seen from screenshots in the update tutorial, YT-videos etc, the QL does NOT show the SUB FW version. Is this correct?
Logged

Kirby Yarbrough

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 513
  • Reston, Virginia
Re: Yamaha firmware update
« Reply #14 on: August 07, 2018, 09:43:25 AM »

the QL does NOT show the SUB FW version

Logged

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2253
Re: Yamaha firmware update
« Reply #15 on: August 07, 2018, 10:01:22 AM »

The CL and the QL share the same architecture as viewed by the user, but not necessarily the same internal architecture.
Logged

Miguel Dahl

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 548
Re: Yamaha firmware update
« Reply #16 on: August 08, 2018, 04:59:03 PM »

The CL and the QL share the same architecture as viewed by the user, but not necessarily the same internal architecture.

Right. So the QL is not sick is what I understand. Thanks.

Logged

ProSoundWeb Community

Re: Yamaha firmware update
« Reply #16 on: August 08, 2018, 04:59:03 PM »


Pages: 1 [2]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.026 seconds with 25 queries.