Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Paul Miller]

Mains - installed
1x Crown XTI 2000 highs
2x Crown XTI 4000 lows
1x Crown XTI 6000 subs - backup, replaced with:
2x QSC PL380 subs

Monitors
2x QSC PL340

Mobile
4x QSC PL380 in various configurations
1x QSC PL325

[Tom Burgess]

2 X Crown XLS2500 powering 4 monitor mixes (2 ea. JBL PRX412's / 415's).  Mains are powered.

[Laurence Nefzger]

(2) DNA 20K4 PRo (one is spare) for mains and subs.
(1) Powersoft Ottocanali 12K4 DSP for monitors.

[Chris Hindle]

QSC EX-4000 (4) on mains
QSC MX-1500 (4) on 2 x 4 mix bi-amp wedge racks
Peavey CS-200X (4) on 2 x 4 mix bi-amp wedge racks
QSC MX-1500 (3) for various throw and go uses.

Yup, it's all heavy.
 Yup, it's all PAID FOR, 100 times over....
And they just keep on ticking, with yearly cleaning.
Chris.

[Lance Hallmark]

1 Powersoft K10 for JTR Orbit Shifters
2 Crown XTI6002, one for pair of JTR Noesis 3TX, one for Orbit Shifters
1 Crown XLS4002, for pair of EV SX200s

Numerous other powered speakers...
Considering picking up an INuke as a backup amp.

[Will Knight]

Used to run all Crown XTI's (1K, 2K, 4K) but sold and switched to:

QSC PL340 (2) for Mains (small SOS Rig) and Monitors
QSC PL380 (1) for Subs
QSC RMX 4050HD (1) for Subs (as backup)
DBX Venue 360 (1) & QSC Basis (1) for LSM

The rest of inventory and new acquisitions are all Powered

[Mark Oakley]

Wedding/Corporate System:
Crown MA 1202 and 2402 for EV Deltamax's
Crown MA 5002 for Subs (either Adamson B-218 or S-218)
2 Powersoft M50Q-DSP+Eth for Monitors (love these things)

24-box Adamson MH-225 System:
4 Audiopro AP-1200 (hi's, mid's)
8 Audiopro AP-3400 (lows, subs)

Not really a fan of powered boxes. Give me a 3 or 4-way system that I can measure and tweak.

-Mark

[Chris Hindle]

24-box Adamson MH-225 System:

Jeez, I loved that system.
Drove a 24 x MH225 and 24 X B218 rig for many years.
The BSS FDS(whatever number) with the custom cards was the fail point of the rig. It was rare we were stereo. One of those damn things always seemed to be "broken"

Great memories, spectacular sounding shows.
On track, That rig was powered with QSC EX-4000, nad EX-2500. LOTS of them !
Chris.

[Chris Grimshaw]

I actually run iNukes for quite a lot of my system. I do make sure there's a backup amp at each gig, though.

Highs - two channels of an NU4-6000 (other two channels can run a pair of wedges, or bridged to run a couple of subs)
Mids - NU6000
Subs - Crown MA12000i (except for small events with no wedge monitors - see above)

Misc - couple of NU3000DSP, couple of NU6000DSP, Crown MA5002VZ.

The Behringer amps have worked well for me. My biggest gripe is they sound awful if you hit clipping. Some kind of external limiting is mandatory.
Apart from that, they're fairly clean and put out a lot of power in a light package.

I keep thinking of taking the leap up to a Powersoft X4 for the mid-highs and keeping the Crown for subs, but that's a serious chunk of cash for a one-man operation like me.

Chris

[Don Davis]

All Crown
6 - IT9000HDs for mains & subs
14 - IT4000s for monitors and smaller stuff
6 - XTI4000's for monitors and smaller stuff

[ProSoundWeb Community]