ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2] 3 4 ... 6   Go Down

Author Topic: Gear Survey: What Amps Are You Using (Really)?  (Read 8542 times)

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3089
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #10 on: July 07, 2018, 11:44:42 PM »

Lots of QSC PL2's, PLX3602's and still lugging around some Crown MA3600's for subs. I also have a Crown XLS2502 in a rack bag for a back up.

My oddball leftover amps include two Carver PM600's (one is used for my computer speakers) a Carver PM420 , two EV/Dynacord 7300's and a 7100, two Crown D75's, a QSC 1100, Hafler DH200 (long since retired to my home stereo).
These oddball leftover amps with exception of the Hafler and the PM600 on my computer still earn some money a time or two a year.
« Last Edit: July 08, 2018, 01:22:48 AM by Mike Caldwell »
Logged

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1966
  • So. Dak.
    • Sturz Audio
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #11 on: July 07, 2018, 11:47:56 PM »

for instance, I used to hear a lot about Camco (not as much anymore)

Any takers?

Camco was purchased by LAcoustics
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Jason Raboin

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 373
    • Klondike Sound
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #12 on: July 08, 2018, 09:45:43 AM »

We've got:

36 Lab Fp+ 7000
10 Linea Research 44M10
5 Powersoft K3 DSP
2 Powersoft M50Q DSP
a few dozen older QSC amps
Logged
Jason Raboin
Partner
Klondike Sound

Robert Piascik

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 733
  • Westerville, OH (near Columbus)
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #13 on: July 08, 2018, 09:48:57 AM »

2x Powersoft X4
4x Powersoft M50Q
6x Crown iT8k
4x Crown Xti6k
4x Crown Xti4k
Logged
Pi Entertainment Services
Midas M32R / MR18
Behringer X32R
Danley SH50 / SM80 / TH118 / TH115
Fulcrum Acoustic fa22ac
RCF NX 12SMA
Yamaha DSR112 / DZR10
Powersoft X4 / M50Q
Crown iT8k

John Halliburton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 866
  • Still has hair and white pointy beard...
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #14 on: July 08, 2018, 10:13:16 AM »

A pair of iTech 6k
A pair of Yorkville A4.4
A pair of QSC PLD 4.5

An odd Microtech or two, and a couple of 1u baby Crest 1001 somewhere in a rack...

Best regards,

John
Logged

Jay Marr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 780
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #15 on: July 08, 2018, 10:22:31 AM »

Bunch if Crown iTechs.  Mainly just running JBL SRX subs.

Have a few Crown K2s and a CE4000 in the basement somewhere too.
Logged

Rick Powell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 920
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #16 on: July 08, 2018, 10:58:15 AM »

Crown ITech 6000 on subs
Crown xti4000 on tops
Crown xti2000 x 2 on monitors - 3 of us on ears with the regular band, so not always used. They all sit in a single rack. No failures whatsoever for the 10 years or so I’ve had this bunch, and all were purchased used. The xti’s are sensitive to low voltage which I’ve encountered once (as in measuring 100v at the outlet) but the fault of the venue for poor provisions, not the fault of the equipment, and we still limped thru the gig with brownouts where we had to cut the volume and the distortion went up.
« Last Edit: July 08, 2018, 11:03:02 AM by Rick Powell »
Logged

Mal Brown

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1340
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #17 on: July 08, 2018, 11:21:13 AM »

Mains stereo racks plus spare
3x EV P2000 ch1 sub and ch2 mid bass
3x EV P1200 ch1 mids, ch2 high’s
Currently replacing with QSC PLX 2 3102 and plx 1602

CA/9’s and 1602’s as spares

For passive monitors
2 x QSC Plx2 1804
2 x plx 1602
1 x QSC cx-502 (install ver of plx 1602)
1 x Carvin dcm 2004L

Plus lots of QSC K and KW series stuff
Logged
Bass player, sound guy.
FB Gorge Sound and Light
FB Willyand Nelson
FB SideShow

RYAN LOUDMUSIC JENKINS

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 609
    • Az Concert Sound Solutions
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #18 on: July 08, 2018, 02:11:46 PM »

My Camco Vortex 6 amps have been awesome for years!  Run up to four 2x18" subs per amp depending on the application.

Logged

scottstephens

  • Sr. Member
  • ****
  • Online Online
  • Posts: 402
Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #19 on: July 08, 2018, 02:58:57 PM »

All Crown.   Subs----MA9000i
                 Tops-----xti 4k
                 Mons----xti 4k

also still have a MA2400 running single 18's and a MA1200 running 15's + horn ... 1989 vintage; still kicking butt

Lots of JBL powered stuff

Scott
Logged

ProSoundWeb Community

Re: Gear Survey: What Amps Are You Using (Really)?
« Reply #19 on: July 08, 2018, 02:58:57 PM »


Pages: 1 [2] 3 4 ... 6   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.037 seconds with 25 queries.