ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Antenna stands  (Read 3201 times)

Joe Calabrese

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Antenna stands
« on: July 02, 2018, 06:08:32 PM »

I'm looking to get some new stands. Must be 10'+ tall, road worthy and pack up somewhat compact.  What models have you had good luck with?
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7552
  • Audio Plumber
Re: Antenna stands
« Reply #1 on: July 02, 2018, 06:39:06 PM »

I'm looking to get some new stands. Must be 10'+ tall, road worthy and pack up somewhat compact.  What models have you had good luck with?

Right now I a using an Ultimate speaker stand. They go high enough, and aren't too heavy. I have also used Matthews C Stands, they go higher, but are heavy.

Mac
Logged

frank kayser

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1655
  • Maryland suburbs of Washington DC
Re: Antenna stands
« Reply #2 on: July 02, 2018, 07:13:49 PM »

Right now I a using an Ultimate speaker stand. They go high enough, and aren't too heavy. I have also used Matthews C Stands, they go higher, but are heavy.

Mac
The Ultimate TS88 or TS99 speaker stands are their taller-than-standard (TS-80 or TS-90) if you need a bit more height.  Same stand construction, larger base circle, taller.  I like the 90 series with the Tele-lock lift assist.  No pins. Control the speed of descent.


frank
Logged

Justin Goodman

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 81
Re: Antenna stands
« Reply #3 on: July 02, 2018, 07:53:48 PM »

What adapters convert a speaker stand to a mic threading?
Logged

Aram Piligian

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 89
Re: Antenna stands
« Reply #4 on: July 02, 2018, 08:24:31 PM »

Related: Does anyone know who makes these stands?

Logged

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7536
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: Antenna stands
« Reply #5 on: July 02, 2018, 08:46:35 PM »

Related: Does anyone know who makes these stands?
Do you have a picture of the base

Sent from my VS996 using Tapatalk

Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7552
  • Audio Plumber
Re: Antenna stands
« Reply #6 on: July 02, 2018, 09:12:03 PM »

Related: Does anyone know who makes these stands?

Judging from the locking knobs, those could be Matthews stands painted black.

Mac
Logged

Henry Cohen

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1220
  • Westchester Co., NY, USA
Re: Antenna stands
« Reply #7 on: July 02, 2018, 09:33:47 PM »

They are Mannfrotto
Logged
Henry Cohen

CP Communications    www.cpcomms.com
Radio Active Designs   www.radioactiverf.com

James Cotton

  • Newbie
  • *
  • Offline Offline
  • Posts: 47
Re: Antenna stands
« Reply #8 on: July 03, 2018, 08:02:09 AM »

K&M Overhead stands work well.
20800 goes to 3.1m (just over 10'), not much bigger than a standard K&M tripod when collapsed.
If you need more the 20811 goes to 4.4m (over 14') but it's bigger and more than twice as heavy.
Logged

Brian Hancock

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 86
Re: Antenna stands
« Reply #9 on: July 03, 2018, 09:38:36 AM »

shure markets their own antenna stand s15a goes about 13 ish feet up solid base ... usually just throw 1 sandbag on it ... for something more heavy duty could look at the afore mentioned matthews stands ... search combo stand they are a lighting stand you will need to fashion some kind of spud adapter their maybe something existing not sure
Logged

ProSoundWeb Community

Re: Antenna stands
« Reply #9 on: July 03, 2018, 09:38:36 AM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 23 queries.