ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Shure 600Mhz hardware conversion  (Read 1187 times)

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1968
  • So. Dak.
    • Sturz Audio
Shure 600Mhz hardware conversion
« on: June 27, 2018, 09:41:33 AM »
I don't remember seeing this posted before, but one of our techs opened wireless workbench and was greeted with a prompt that seemed to indicate Shure has firmware allowing 600Mhz band devices to be reprogrammed to stay complaint.

Seem's to be applicable to J5 or L3 (Axient) , J50 or L50 (ULXD QLXD), or J8 or L8 (PSM1000).

Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2259
Re: Shure 600Mhz hardware conversion
« Reply #1 on: June 27, 2018, 10:05:20 AM »
It's the post-600MHz *permanent* change to updateable gear in the affected frequency bands. Doing it will keep your gear FCC legal to use, but you may not need to do it right away.
Logged

Luke Geis

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2357
    • Owner of Endever Music Production's
Re: Shure 600Mhz hardware conversion
« Reply #2 on: June 27, 2018, 11:40:52 PM »
If so, that would be the next best thing since sliced bread!!!
Logged
I don't understand how you can't hear yourself

ProSoundWeb Community

Re: Shure 600Mhz hardware conversion
« Reply #2 on: June 27, 2018, 11:40:52 PM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.034 seconds with 25 queries.