ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: DMX and Power Inverter  (Read 265 times)

Robert Frank

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
DMX and Power Inverter
« on: June 04, 2018, 11:18:35 pm »

Iím fairly new to intelligent lighting, so this might be completely idiotic, but hopefully I get get some help.

A company I am working for wants to use flexible RGB LED neon in a production they are doing.  The neon is 120v.  This wouldnít be a problem normally, except the DMX is wireless and is powered by a 12v battery (the decoder is 12v/5a).  My thought is to attach the data and click wires to the decorder, but the power and ground wires to a pure sine power inverter, which would feed into the decoder on the other side.  Does that make sense?  Does that work?  Are there better solutions?
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6240
  • Audio Plumber
Posting Rules
« Reply #1 on: June 04, 2018, 11:23:20 pm »

Iím fairly new to intelligent lighting

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged
Pages: [1]   Go Up
 


Page created in 0.05 seconds with 23 queries.