ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Where are the eq curves for the QSC k.2 series?  (Read 625 times)

Wayne Smith2

  • Full Member
  • ***
  • Offline Offline
  • Posts: 104
Where are the eq curves for the QSC k.2 series?
« on: May 08, 2018, 10:28:24 pm »

Haven't found them among their docs save some cross over slopes for sub integration.
Thanks ahead
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 20522
  • Wichita, Kansas USA
Re: Where are the eq curves for the QSC k.2 series?
« Reply #1 on: May 08, 2018, 11:16:13 pm »

Haven't found them among their docs save some cross over slopes for sub integration.
Thanks ahead

You'll probably have to ask QSC for this info.

There might be some more filters at play in the presets that are not part of the 4 band EQ accessible to the user.  How that's done and what they are may be considered proprietary by the manufacturer.
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

Wayne Smith2

  • Full Member
  • ***
  • Offline Offline
  • Posts: 104
Re: Where are the eq curves for the QSC k.2 series?
« Reply #2 on: May 09, 2018, 01:21:20 am »

You'll probably have to ask QSC for this info.

There might be some more filters at play in the presets that are not part of the 4 band EQ accessible to the user.  How that's done and what they are may be considered proprietary by the manufacturer.
Thanks. Yes I'd expect they would go beyond what could be done with the eq available.
It just seems pretty odd that they wouldn't simply include the info.
Logged

Chris Grimshaw

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1269
  • Sheffield, UK
    • Grimshaw Audio
Re: Where are the eq curves for the QSC k.2 series?
« Reply #3 on: May 09, 2018, 03:31:24 am »


It just seems pretty odd that they wouldn't simply include the info.

Seems quite reasonable to me.

I did some measurements of an amplifier from a speaker from a different manufacturer, and it ain't pretty. You're looking at of the order of 15dB of boost towards the low end, which gets cut down at high levels (which they really don't want you to know), among other things. Switching to the monitor EQ curve gives something different again.

I don't think they'd want to give up their hard work for nothing.

Chris
Logged
Sheffield-based sound engineering.
www.grimshawaudio.com

Jean-Pierre Coetzee

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 772
  • Gauteng, South Africa
Re: Where are the eq curves for the QSC k.2 series?
« Reply #4 on: May 09, 2018, 05:05:10 am »

If you are looking for the Frequency Response graphs those are in the specifications document, if you are looking at the EQ that the manufacturer has applied to the loudspeakers then it's unlikely you will get that information.
Logged
Audio Technician
Word & Life Church

"If you want "loud", then run a piece of sheet metal through a table saw------

If you want "watts"-then plug in a toaster"
- Ivan Beaver

Wayne Smith2

  • Full Member
  • ***
  • Offline Offline
  • Posts: 104
Re: Where are the eq curves for the QSC k.2 series?
« Reply #5 on: May 10, 2018, 02:19:04 pm »

If you are looking for the Frequency Response graphs those are in the specifications document, if you are looking at the EQ that the manufacturer has applied to the loudspeakers then it's unlikely you will get that information.
So far I've not found any in the pdf's on line.
I'm waiting for a call back from QSC but if you've seen them that'd be great if you can point me the right direction.
Logged

ProSoundWeb Community

Re: Where are the eq curves for the QSC k.2 series?
« Reply #5 on: May 10, 2018, 02:19:04 pm »


Pages: [1]   Go Up
 



Page created in 0.047 seconds with 23 queries.