ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]   Go Down

Author Topic: Tempest intercom  (Read 5817 times)

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1456
    • Best Audio
Re: Tempest intercom
« Reply #20 on: April 10, 2019, 12:12:27 AM »

Logged
Pete Erskine
917-750-1134
www.bestaudio.com
[email protected]

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23741
  • Wichita, Kansas USA
Re: Tempest intercom
« Reply #21 on: April 10, 2019, 10:38:18 AM »

Manuals are in support menu here

http://www.coachcomm.com/product/tempest-ng/features/

Thanks for the link, Pete.  Not my job to make their shit work, but I'll read it in case my boss gets some demented idea to purchase a used Tempest...

Oh, no corner reflector antennae this year...
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Brian Hancock

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 86
Re: Tempest intercom
« Reply #22 on: April 10, 2019, 01:29:48 PM »

http://www.l-com.com/wireless-antenna-900-mhz-patch-antennas_mobi

Had better luck with l com patch antennas on this system or their metal yagi

Straight from base to lmr400 to n connector. Half coupler on the antenna

We have used these in the motorsports realm a lot and although they don't sound wonderful are very usable rugged and I think have been well worth the investment.

Logged

Nathan Salt

  • Full Member
  • ***
  • Offline Offline
  • Posts: 112
Re: Tempest intercom
« Reply #23 on: April 16, 2019, 12:08:40 AM »

Yep tempest is pretty bad. We had that before getting freespeak2.
Logged
Nathan Salt

Henry Cohen

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1220
  • Westchester Co., NY, USA
Re: Tempest intercom
« Reply #24 on: April 16, 2019, 05:32:57 AM »


Straight from base to lmr400 to n connector. Half coupler on the antenna

What is a “half coupler”?
Logged
Henry Cohen

CP Communications    www.cpcomms.com
Radio Active Designs   www.radioactiverf.com

Brian Hancock

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 86
Re: Tempest intercom
« Reply #25 on: April 16, 2019, 01:43:09 PM »

What is a “half coupler”?

Should have been specific ... just a clamp cheseborough etc. https://www.thelightsource.com/products/mega-coupler-10

The light source I think called some of them half instead of full ... ironicly they have the 2 in square version of this listed as half coupler and the 2 in round version listed as mega ... anyway just a clamp to a pipe or truss etc.

The plastic patch antennas have 1/2 or may e 3/8 thread holes in them for mounting
Logged

ProSoundWeb Community

Re: Tempest intercom
« Reply #25 on: April 16, 2019, 01:43:09 PM »


Pages: 1 2 [3]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.044 seconds with 24 queries.