ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2] 3  All   Go Down

Author Topic: No fuses? No problem!  (Read 8464 times)

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2009
  • Niceville, FL
    • Nailed Productions
Re: No fuses? No problem!
« Reply #10 on: April 01, 2018, 11:47:37 AM »

I suspect (and I have no way to prove this), but I'd bet whoever was there "needed" it to supply power and wanted something akin to a "fuse" and used the copper wire.

The bolts sound scary...

Based on Preece  and Onderdonk.
https://www.powerstream.com/wire-fusing-currents.htm

This is schweet :) thanks!
Logged
I'm just a guy trying to do the next right thing.

This business is for people with too much energy for desk jobs and too much brain for labor jobs. - Scott Helmke

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9385
  • Atlanta GA
Re: No fuses? No problem!
« Reply #11 on: April 01, 2018, 02:38:21 PM »

You might be surprised by how much current that takes... About a year ago I needed to DIY a small fuse to get an amp working until replacement fuses arrived. I macgyvered a single stand of the smallest wire I could find (30ga?) tacked across the blown fuse, but decided to look up it's fuse current and that was close to 10A IIRC.  :o

 (BTW kids don't do this at home).

JR
Been there, done that, more times than I will admit.  But in controlled situations, NOT for a customer to take with them.

But NOT recommended.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

Mike Sokol

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3361
  • Lead instructor for the No~Shock~Zone
    • No~Shock~Zone Electrical Safety
Re: No fuses? No problem!
« Reply #12 on: April 01, 2018, 02:50:01 PM »

Based on Preece  and Onderdonk.
https://www.powerstream.com/wire-fusing-currents.htm

That's great, but I don't see the fusing currents for a 1/4" nutdriver.  ;D

Ron Hebbard

  • Full Member
  • ***
  • Offline Offline
  • Posts: 198
Re: No fuses? No problem!
« Reply #13 on: April 01, 2018, 03:13:52 PM »

That's great, but I don't see the fusing currents for a 1/4" nutdriver.  ;D
  Hollow shaft or solid? 
Toodleoo!
Ron Hebbard.
Logged

Mike Sokol

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3361
  • Lead instructor for the No~Shock~Zone
    • No~Shock~Zone Electrical Safety
Re: No fuses? No problem!
« Reply #14 on: April 01, 2018, 03:45:16 PM »

Based on Preece  and Onderdonk.
https://www.powerstream.com/wire-fusing-currents.htm

Can I print this out to show the AHJ why he should ignore my solid wire jumpers in place of fuses?

John Roberts {JR}

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16972
  • Hickory, Mississippi, USA
    • Resotune
Re: No fuses? No problem!
« Reply #15 on: April 01, 2018, 03:58:43 PM »

Logged
Cancel the "cancel culture". Do not participate in mob hatred.

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 22806
  • Wichita, Kansas USA
Re: No fuses? No problem!
« Reply #16 on: April 01, 2018, 05:11:14 PM »

Can I print this out to show the AHJ why he should ignore my solid wire jumpers in place of fuses?

How about an inline "wire/fuse" holder that is protected by an appropriate (for wiring size/terminals/etc) OCPD?  You could demonstrate how much current flows through (and with an infrared camera, show the heat) a conductor about to "fuse".
Logged
"Art has always held a tenuous position between acts of subversion and status symbol collected by those who profit from the very status quo the art purports to subvert." - Stephen Colbert

Mike Sokol

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3361
  • Lead instructor for the No~Shock~Zone
    • No~Shock~Zone Electrical Safety
Re: No fuses? No problem!
« Reply #17 on: April 01, 2018, 05:22:52 PM »

How about an inline "wire/fuse" holder that is protected by an appropriate (for wiring size/terminals/etc) OCPD?  You could demonstrate how much current flows through (and with an infrared camera, show the heat) a conductor about to "fuse".

Back in the day we called this a "smoke test".

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 22806
  • Wichita, Kansas USA
Re: No fuses? No problem!
« Reply #18 on: April 01, 2018, 05:47:50 PM »

Back in the day we called this a "smoke test".

Smoking is on the downswing, Mike. ;)

Controlled destruction for instruction!
Logged
"Art has always held a tenuous position between acts of subversion and status symbol collected by those who profit from the very status quo the art purports to subvert." - Stephen Colbert

John Roberts {JR}

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16972
  • Hickory, Mississippi, USA
    • Resotune
Re: No fuses? No problem!
« Reply #19 on: April 01, 2018, 08:22:01 PM »

Releasing smoke is a way to keep students awake...

JR
Logged
Cancel the "cancel culture". Do not participate in mob hatred.

ProSoundWeb Community

Re: No fuses? No problem!
« Reply #19 on: April 01, 2018, 08:22:01 PM »


Pages: 1 [2] 3  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.098 seconds with 25 queries.