ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [All]   Go Down

Author Topic: Anybody used TomCom's com system?  (Read 5243 times)

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3703
  • College Station, Texas
    • Daniela Weaver Photography
Anybody used TomCom's com system?
« on: March 23, 2018, 08:52:31 PM »

http://tomcom.tv/tomcom.htm

I've never heard of it, but it looks decent and I like the price. Says it's clearcom compatible.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 1400
Re: Anybody used TomCom's com system?
« Reply #1 on: March 23, 2018, 10:39:59 PM »

http://tomcom.tv/tomcom.htm

I've never heard of it, but it looks decent and I like the price. Says it's clearcom compatible.

Where does it say the comms is clearcomm compatible.  Just looks like they offer “clear com type” headsets.

That said, it wouldn’t surprise me if it is clearcom compatible.  I also wouldn’t spend money without a serious demo.  That website does something very far from breeding confidence.
Logged

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3703
  • College Station, Texas
    • Daniela Weaver Photography
Re: Anybody used TomCom's com system?
« Reply #2 on: March 24, 2018, 12:09:06 AM »

It did on the ebay listing where I found it.

I just did a little googling and found a couple references to the owner (Tom Hilbe) being a crook. I guess I'll pass.

Are there any cheap com systems that work out there? I just need 1 channel and 6 or so packs.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

Pete Erskine

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1457
    • Best Audio
Re: Anybody used TomCom's com system?
« Reply #3 on: March 24, 2018, 01:30:25 AM »

http://tomcom.tv/tomcom.htm

I've never heard of it, but it looks decent and I like the price. Says it's clearcom compatible.


Clearly is not......  Website is devoid of any useful information.
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
[email protected]

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 1400
Re: Anybody used TomCom's com system?
« Reply #4 on: March 24, 2018, 02:00:16 AM »

It did on the ebay listing where I found it.

I just did a little googling and found a couple references to the owner (Tom Hilbe) being a crook. I guess I'll pass.

Are there any cheap com systems that work out there? I just need 1 channel and 6 or so packs.

Define cheap.  :)
Logged

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3667
  • Toronto
Re: Anybody used TomCom's com system?
« Reply #5 on: March 24, 2018, 07:11:56 AM »

It did on the ebay listing where I found it.

I just did a little googling and found a couple references to the owner (Tom Hilbe) being a crook. I guess I'll pass.

Are there any cheap com systems that work out there? I just need 1 channel and 6 or so packs.
As much as I like to save money too, I have found that "cheap" and "RF" just don't go well together.
Logged
I don't care enough to be apathetic

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3703
  • College Station, Texas
    • Daniela Weaver Photography
Re: Anybody used TomCom's com system?
« Reply #6 on: March 24, 2018, 11:11:41 AM »

As much as I like to save money too, I have found that "cheap" and "RF" just don't go well together.

I don’t need rf. I‘m looking for wired units for a 4 camera setup. The cameras’s don’t move.

Cheap would hopefully be 2000 ish.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

Ray Aberle

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 3455
  • Located in Vancouver, WA (and serves OR-WA-ID-BC)
    • Kelcema Audio
Re: Anybody used TomCom's com system?
« Reply #7 on: March 24, 2018, 11:17:08 AM »

I've had good success with the Production Intercom products. Belt packs can be found used for under $200; new I think they're closer to $300. Same deal with the power supplies- I think I've gotten each one of mine for only a couple hundred. Headsets (brand new) $110 to $190. To be candid, I cruise eBay looking for good deals on them when I need them.

... which reminds me, I need another belt pack anyway.... ha.

-Ray
Logged
Kelcema Audio
Regional - Serving Pacific Northwest (OR, WA, ID, BC)

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7562
  • Audio Plumber
Re: Anybody used TomCom's com system?
« Reply #8 on: March 24, 2018, 12:08:01 PM »

I don’t need rf. I‘m looking for wired units for a 4 camera setup. The cameras’s don’t move.

Cheap would hopefully be 2000 ish.

Do the cameras have comm in them? You may not need packs for the cameras, just a way to interface to the comm port on the CCUs.

Mac
Logged

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 1400
Re: Anybody used TomCom's com system?
« Reply #9 on: March 24, 2018, 04:45:22 PM »

I've had good success with the Production Intercom products. Belt packs can be found used for under $200; new I think they're closer to $300. Same deal with the power supplies- I think I've gotten each one of mine for only a couple hundred. Headsets (brand new) $110 to $190. To be candid, I cruise eBay looking for good deals on them when I need them.

... which reminds me, I need another belt pack anyway.... ha.

-Ray

I second the production intercom stuff.  They have a budget econocom linetoo that’ll probably get you done for under 2K.

Mac’s suggestion is also good though interfacing to some cameras for a one-off may be far more work than it’s worth if they aren’t already setup for comms.
Logged

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3703
  • College Station, Texas
    • Daniela Weaver Photography
Re: Anybody used TomCom's com system?
« Reply #10 on: March 24, 2018, 10:07:12 PM »

Do the cameras have comm in them? You may not need packs for the cameras, just a way to interface to the comm port on the CCUs.

Mac

Unfortunately no. These are glorified cam-corders thathave been in place for years. We are moving to some black magic bodies sometime soon. Basically we are trying to up our video game. I have very little to do with video village except to send them an audio mix.

We had a special event yesterday and I had to wear one of the "comms" that they use and was appalled. Therefor out of the goodness of my heart, and the fact that I run all the audio anyway, I'm getting them some proper comms.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3667
  • Toronto
Re: Anybody used TomCom's com system?
« Reply #11 on: March 25, 2018, 06:13:35 AM »

I don’t need rf. I‘m looking for wired units for a 4 camera setup. The cameras’s don’t move.

Cheap would hopefully be 2000 ish.
My mistake Tim. :-[
On the web page it kind of looked like a wireless kit.
Have you looked at this product?
http://prointercomllc.com/category/belt-packs/
« Last Edit: March 25, 2018, 06:15:53 AM by Keith Broughton »
Logged
I don't care enough to be apathetic

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3703
  • College Station, Texas
    • Daniela Weaver Photography
Re: Anybody used TomCom's com system?
« Reply #12 on: March 25, 2018, 10:17:53 AM »

My mistake Tim. :-[
On the web page it kind of looked like a wireless kit.
Have you looked at this product?
http://prointercomllc.com/category/belt-packs/

I've used Production Intercoms a lot before, but didn't know about the "econo" version. This looks good.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

ProSoundWeb Community

Re: Anybody used TomCom's com system?
« Reply #12 on: March 25, 2018, 10:17:53 AM »


Pages: 1 2 [All]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.042 seconds with 24 queries.