ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Anybody used TomCom's com system?  (Read 3303 times)

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2448
  • College Station, Texas
    • Daniela Weaver Photography
Anybody used TomCom's com system?
« on: March 23, 2018, 08:52:31 pm »

http://tomcom.tv/tomcom.htm

I've never heard of it, but it looks decent and I like the price. Says it's clearcom compatible.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 936
Re: Anybody used TomCom's com system?
« Reply #1 on: March 23, 2018, 10:39:59 pm »

http://tomcom.tv/tomcom.htm

I've never heard of it, but it looks decent and I like the price. Says it's clearcom compatible.

Where does it say the comms is clearcomm compatible.  Just looks like they offer ďclear com typeĒ headsets.

That said, it wouldnít surprise me if it is clearcom compatible.  I also wouldnít spend money without a serious demo.  That website does something very far from breeding confidence.
Logged

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2448
  • College Station, Texas
    • Daniela Weaver Photography
Re: Anybody used TomCom's com system?
« Reply #2 on: March 24, 2018, 12:09:06 am »

It did on the ebay listing where I found it.

I just did a little googling and found a couple references to the owner (Tom Hilbe) being a crook. I guess I'll pass.

Are there any cheap com systems that work out there? I just need 1 channel and 6 or so packs.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

Pete Erskine

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1366
    • Best Audio
Re: Anybody used TomCom's com system?
« Reply #3 on: March 24, 2018, 01:30:25 am »

http://tomcom.tv/tomcom.htm

I've never heard of it, but it looks decent and I like the price. Says it's clearcom compatible.


Clearly is not......  Website is devoid of any useful information.
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 936
Re: Anybody used TomCom's com system?
« Reply #4 on: March 24, 2018, 02:00:16 am »

It did on the ebay listing where I found it.

I just did a little googling and found a couple references to the owner (Tom Hilbe) being a crook. I guess I'll pass.

Are there any cheap com systems that work out there? I just need 1 channel and 6 or so packs.

Define cheap.  :)
Logged

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3262
  • Toronto
Re: Anybody used TomCom's com system?
« Reply #5 on: March 24, 2018, 07:11:56 am »

It did on the ebay listing where I found it.

I just did a little googling and found a couple references to the owner (Tom Hilbe) being a crook. I guess I'll pass.

Are there any cheap com systems that work out there? I just need 1 channel and 6 or so packs.
As much as I like to save money too, I have found that "cheap" and "RF" just don't go well together.
Logged
I don't care enough to be apathetic

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2448
  • College Station, Texas
    • Daniela Weaver Photography
Re: Anybody used TomCom's com system?
« Reply #6 on: March 24, 2018, 11:11:41 am »

As much as I like to save money too, I have found that "cheap" and "RF" just don't go well together.

I donít need rf. IĎm looking for wired units for a 4 camera setup. The camerasís donít move.

Cheap would hopefully be 2000 ish.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

Ray Aberle

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 3425
  • Located in Vancouver, WA (and serves OR-WA-ID-BC)
    • Kelcema Audio
Re: Anybody used TomCom's com system?
« Reply #7 on: March 24, 2018, 11:17:08 am »

I've had good success with the Production Intercom products. Belt packs can be found used for under $200; new I think they're closer to $300. Same deal with the power supplies- I think I've gotten each one of mine for only a couple hundred. Headsets (brand new) $110 to $190. To be candid, I cruise eBay looking for good deals on them when I need them.

... which reminds me, I need another belt pack anyway.... ha.

-Ray
Logged
Kelcema Audio
Regional - Serving Pacific Northwest (OR, WA, ID, BC)

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6731
  • Audio Plumber
Re: Anybody used TomCom's com system?
« Reply #8 on: March 24, 2018, 12:08:01 pm »

I donít need rf. IĎm looking for wired units for a 4 camera setup. The camerasís donít move.

Cheap would hopefully be 2000 ish.

Do the cameras have comm in them? You may not need packs for the cameras, just a way to interface to the comm port on the CCUs.

Mac
Logged

Erik Jerde

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 936
Re: Anybody used TomCom's com system?
« Reply #9 on: March 24, 2018, 04:45:22 pm »

I've had good success with the Production Intercom products. Belt packs can be found used for under $200; new I think they're closer to $300. Same deal with the power supplies- I think I've gotten each one of mine for only a couple hundred. Headsets (brand new) $110 to $190. To be candid, I cruise eBay looking for good deals on them when I need them.

... which reminds me, I need another belt pack anyway.... ha.

-Ray

I second the production intercom stuff.  They have a budget econocom linetoo thatíll probably get you done for under 2K.

Macís suggestion is also good though interfacing to some cameras for a one-off may be far more work than itís worth if they arenít already setup for comms.
Logged

ProSoundWeb Community

Re: Anybody used TomCom's com system?
¬ę Reply #9 on: March 24, 2018, 04:45:22 pm ¬Ľ


Pages: [1] 2  All   Go Up
 



Page created in 0.09 seconds with 24 queries.