ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Mixer case good cond. - 38X35X8 internal - 3/8 ply - Make me an offer!!!!  (Read 556 times)

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1383
  • Covington, Ohio
    • Mike Caldwell Audio Productions

The case is solid 3/8 inch plywood construction with Penn Fabrication hardware, caster board, Guitel Casters and three handles on each side. The internal dimensions are 38 inches wide and 35 inches deep, total inside height it 8 inches, the bottom tray is 1 inches, the top lid is 7 inches. The foam is in good solid condition and could be re-fitted for your mixer.
I am not sure of the case manufacture, I could not find any name on it.
I am located in Western Ohio and would put an hour drive into delivering the case or meeting up to make a drop off.
I would ship it if you want to pay for shipping.


Let me know if you have any questions, make me an offer!!
Mike C.
« Last Edit: March 18, 2018, 07:42:40 pm by Mike Caldwell »
Pages: [1]   Go Up

Page created in 0.047 seconds with 19 queries.