The case is solid 3/8 inch plywood construction with Penn Fabrication hardware, caster board, Guitel Casters and three handles on each side. The internal dimensions are 38 inches wide and 35 inches deep, total inside height it 8 ½ inches, the bottom tray is 1 ¼ inches, the top lid is 7 ¼ inches. The foam is in good solid condition and could be re-fitted for your mixer.
I am not sure of the case manufacture, I could not find any name on it.
I am located in Western Ohio and would put an hour drive into delivering the case or meeting up to make a drop off.
I would ship it if you want to pay for shipping.
$200
Let me know if you have any questions, make me an offer!!
Mike C.
