ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [All]   Go Down

Author Topic: Chauvet D-Fi USB momentary blackouts  (Read 3790 times)

Chony Milecki

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Chauvet D-Fi USB momentary blackouts
« on: March 09, 2018, 05:37:20 pm »

I'm using 2x Chauvet 4Bar Tri USBs and 4x Chauvet SlimPar Pro H USBs, and they are controlled by trolled by a Chauvet D-Fi FlareCon.

I have everything connected properly and operating well. Sometimes the wifi signal gets interrupted. This is of course to be expected especially in a room or city with lots of wireless traffic. When this happens, the lights stay on the same color and the USB flashes slowly.

THE PROBLEM IS that when the wifi reconnects (the USB flashes rapidly), the light BLACKS OUT for a split second. This makes the light impossible to use in professional settings.

I've complained to Chauvet and even sent the equipment back to them, but they claim they don't understand the problem, or that there is no problem. (They don't seem to know their own products very well.)

Has anyone here experienced something similar? Is there any way around this?

Thank you,
Chony

PS: And once I'm here: I'm looking to buy 60 uplights with reliable wireless control. What are my options. Haven't found anything great online. Not a fan on the Chauvet freedom pars.


LINKS:
SlimPar USB: https://www.sweetwater.com/store/detail/SlimPARProHd1?gclid=CjwKCAiA_ojVBRAlEiwAOLRxIyEhPyhuJgL5T7ZDAPC8A42SJ62C-GjKVrDn8Zm2Mv_ImJh1WqPsLBoCXOsQAvD_BwE
4 Bar Tri USB: https://www.sweetwater.com/store/detail/4BARFlexTUSB--chauvet-dj-4bar-flex-t-usb-4-by-rgb-par-system
FlareCon: https://www.sweetwater.com/store/detail/FlareConAir--chauvet-dj-flarecon-air-wireless-dmx-d-fi-transmitter-receiver?gclid=CjwKCAiA_ojVBRAlEiwAOLRxIx7xDZ8pl6rQ1clkEUWuNv3qsHFIKv-DbNvdz4k8PvC9TEB8mT6k0hoC63AQAvD_BwE
« Last Edit: March 09, 2018, 05:39:57 pm by Chony Milecki »
Logged

Callan Browne

  • Full Member
  • ***
  • Offline Offline
  • Posts: 200
  • Melbourne, Australia
    • Rubix
Re: Chauvet D-Fi USB momentary blackouts
« Reply #1 on: March 10, 2018, 09:25:06 pm »

Have you tried using different channels on the USB dongles? Your problem seems to be interference and how the lights recover when dmx is restored. If the 1 second dropout is an issue, I'd look to cable your lights.

I have 2x tri par LT's & USB dongles, bigger gigs I use dmx cables, smaller gigs sometimes one light goes black for a moment from time to time. Nobody but me notices it.

Sent from my Pixel using Tapatalk

Logged
Melbourne Cover band: Rubix!

Allen Smith

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: Chauvet D-Fi USB momentary blackouts
« Reply #2 on: March 11, 2018, 11:14:29 pm »

This is not exactly a defect, it is a limitation in the technology.  Wifi is getting very crowded.  I use the Dfi units for my system.  In general it works very well.  I do have one club where it was more glitchy than others although the steps below make it work flawlessly.

My solution was to do the following:

-move my wifi system for my X32 mixer to a different bandwidth to eliminate congestion in my own rig
-make sure my Dfi transmitter is in the on top of a rack with no physical obstructions between it and the lights receiving the signal

These steps make it work pretty flawless.  I am transmitting on a stage so not across a room.

Another step you can consider is using a small USB extension cable to make sure there is line of sight between the transmitter and the receiver dongle.  Again, line of sight is best for distance transmitting.
-
Logged

Chony Milecki

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: Chauvet D-Fi USB momentary blackouts
« Reply #3 on: March 13, 2018, 01:22:38 am »

This is not exactly a defect, it is a limitation in the technology.  Wifi is getting very crowded.  I use the Dfi units for my system.  In general it works very well.  I do have one club where it was more glitchy than others although the steps below make it work flawlessly.

My solution was to do the following:

-move my wifi system for my X32 mixer to a different bandwidth to eliminate congestion in my own rig
-make sure my Dfi transmitter is in the on top of a rack with no physical obstructions between it and the lights receiving the signal

These steps make it work pretty flawless.  I am transmitting on a stage so not across a room.

Another step you can consider is using a small USB extension cable to make sure there is line of sight between the transmitter and the receiver dongle.  Again, line of sight is best for distance transmitting.
-

I do all these things and although it helps I still get occasional drops. It's okay when I'm doing a band on stage, but not okay if I'm backlighting a person speaking and it's being videoed or broadcast.

Chauvet should have designed the lights not to flash off. They could still fix it with a firmware update, but when I spoke to them they just refused to admit that its a problem.

:-(

I've seen cheaper Chinese versions do a more reliable job.
Logged

Jeff Lelko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1502
  • Cape Canaveral, FL
Re: Chauvet D-Fi USB momentary blackouts
« Reply #4 on: March 13, 2018, 04:47:18 pm »

I've seen cheaper Chinese versions do a more reliable job.

And I've seen a $5 DMX cable from Amazon do an even more reliable job.  I don't mean to sound blunt, but this is the type of thing that goes along with using wireless products. 

The same can be said for mixing sound from a tablet.  It's a neat trick when it works, but it's generally ill-advised to rely on such equipment for production critical functions.  If you're doing professional work with professional expectations and absolutely need to have wireless, be prepared to pay a professional price for a professional product.

Logged

Scottshortland

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: Chauvet D-Fi USB momentary blackouts
« Reply #5 on: November 15, 2019, 08:28:05 pm »

Hi,

I have experienced the same thing and do not agree it’s the technology. I used many Chauvet Freedom Fixtures - Sticks, Pars, Colour Band Pix USB etc.. but do not experience the same issue you described although I do for the SlimPAR Hex USB spots. I understand wireless can have its moments but find on a couple of these fixtures drop outs or where they start running their own thing. I have swapped the D Fi USB, mine are even numbered - it gets them working again but soon drops out again. Very frustrating. The overall build, light output and design is superb but connection not as great. 




And I've seen a $5 DMX cable from Amazon do an even more reliable job.  I don't mean to sound blunt, but this is the type of thing that goes along with using wireless products. 

The same can be said for mixing sound from a tablet.  It's a neat trick when it works, but it's generally ill-advised to rely on such equipment for production critical functions.  If you're doing professional work with professional expectations and absolutely need to have wireless, be prepared to pay a professional price for a professional product.
Logged

Taylor Hall

  • Hero Member
  • *****
  • Online Online
  • Posts: 842
Re: Chauvet D-Fi USB momentary blackouts
« Reply #6 on: November 18, 2019, 12:00:03 pm »

I've never had a positive experience with any "big name" wireless DMX system. Either the range is crap, connectivity is bad, or both. Our Donner units have been 100x more reliable than anything Chauvet/Blizzard/ADJ has put out, and doesn't lock us into a single manufacturer's ecosystem. Granted, we used them sparingly. The few times we've seen a loss in communication we never had a blackout, the fixtures just carried on with whatever the last command was.

They're certainly no replacement for a physical cable, though. Converting over to ArtNET was an extremely worthwhile expense as we can condense multiple universes into a single ethernet cable for our FOH run and then break them back out on stage into their respective nodes. Since we've done that the wireless comes out maybe once or twice a year. Food for thought.
Logged
There are two ways to do anything:
1) Do it right
2) Do it over until you do it right

Jeff Lelko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1502
  • Cape Canaveral, FL
Re: Chauvet D-Fi USB momentary blackouts
« Reply #7 on: November 18, 2019, 04:08:01 pm »

I've never had a positive experience with any "big name" wireless DMX system.

What do you consider a "big name" wireless DMX system?
Logged

Taylor Hall

  • Hero Member
  • *****
  • Online Online
  • Posts: 842
Re: Chauvet D-Fi USB momentary blackouts
« Reply #8 on: November 18, 2019, 04:18:55 pm »

What do you consider a "big name" wireless DMX system?
The three that I listed in my post: Chauvet, Blizzard and ADJ.
I've no doubt that there's some arena-level solution that does actually work, but that obviously doesn't fit within the scope of this thread or what I've actually had my hands on in the field.
Logged
There are two ways to do anything:
1) Do it right
2) Do it over until you do it right

Jeff Lelko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1502
  • Cape Canaveral, FL
Re: Chauvet D-Fi USB momentary blackouts
« Reply #9 on: November 18, 2019, 06:24:30 pm »

Chauvet (DJ), Blizzard, and ADJ are for the most part DJ-grade products with the price tag and performance to match.  Their wireless offerings are not professional quality nor should they be depended on for applications that matter. 

The OP mentions “professional setting” where flickering and momentary blackouts are unacceptable.  As with anything wireless, professional performance usual means a professional price tag.  A true “big name” wireless DMX setup can cost thousands but with proper component selection and setup will be very reliable.  It’s up to the OP to decide if it’s worth the cost.
Logged

Taylor Hall

  • Hero Member
  • *****
  • Online Online
  • Posts: 842
Re: Chauvet D-Fi USB momentary blackouts
« Reply #10 on: November 18, 2019, 06:41:14 pm »

Chauvet (DJ), Blizzard, and ADJ are for the most part DJ-grade products with the price tag and performance to match.  Their wireless offerings are not professional quality nor should they be depended on for applications that matter. 

The OP mentions “professional setting” where flickering and momentary blackouts are unacceptable.  As with anything wireless, professional performance usual means a professional price tag.  A true “big name” wireless DMX setup can cost thousands but with proper component selection and setup will be very reliable.  It’s up to the OP to decide if it’s worth the cost.
Hence my purposeful use of "air quotes" around "big name". It's clear to you and me that these type products are more of a gimmick or band-aid solution at this level, but because an established brand (even if it's not established in the "professional" tier of manufacturers) is behind it people can get burned, much as the case was here.

To the OP, what kind of budget are you working with? Like Jeff and myself have alluded to, there are mission-critical solutions that exist, but will not be cheap. The Iron Triangle is in full effect here.
Logged
There are two ways to do anything:
1) Do it right
2) Do it over until you do it right

Mark Cadwallader

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1333
  • Helena, Montana USA
Re: Chauvet D-Fi USB momentary blackouts
« Reply #11 on: November 18, 2019, 07:11:36 pm »

Look at City Theatrical's Show Baby 6 ; they can work reasonably well. About $200/unit; you need at least two units.  We have and use them at a 1900 seat civic auditorium for temporary places we can't readily or easily run a copper line.  Dance booms are a common use; special fixures added on via different universe are another use.
Logged
"Good tools are expensive, but cheap tools are damned expensive."

Mal Brown

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 900
Re: Chauvet D-Fi USB momentary blackouts
« Reply #12 on: November 19, 2019, 03:10:00 pm »

I've had good luck with d-fi and freedom sticks.  also with Donner.  I tend to run a single Donner receiver for a group of fixtures and hard cable the group. ie all the pars on the back truss are a group.  The motion drape hanging on the truss gets it's own receiver.  The d-fi transmitter controlling the sticks attached to the truss gets a receiver. Around 20 fixtures, 3 receivers strategically located.

early on I tried receivers  in the dozen or so pars on the rear truss.  That did not work well...  Some of the fixtures seemed sluggish and some were unresponsive.  I assumed it was just too much 2.4 ghz activity locally.   Going to hard wire seemed to clear it up.
Logged
Bass player, sound guy.
Fb Gorge Sound and Light
WillyandNelson.com

Taylor Hall

  • Hero Member
  • *****
  • Online Online
  • Posts: 842
Re: Chauvet D-Fi USB momentary blackouts
« Reply #13 on: November 19, 2019, 04:39:52 pm »

Another thing that helps is to get the tx as high up as you can and give it a clear line of sight to the rx. Early on we saw dropouts with our donner units but after we stuck the tx on a boom mic stand and fully extended it as high as it would go we had no more problems and haven't had any since using the same method.
Logged
There are two ways to do anything:
1) Do it right
2) Do it over until you do it right

ProSoundWeb Community

Re: Chauvet D-Fi USB momentary blackouts
« Reply #13 on: November 19, 2019, 04:39:52 pm »


Pages: 1 2 [All]   Go Up
 



Page created in 0.056 seconds with 23 queries.