ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Multiable receive antennas  (Read 1426 times)

augie propersi

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
Multiable receive antennas
« on: March 06, 2018, 07:16:57 pm »

I have a case with the actors will be going under a large steal frame 8 high platform
Upstage away from the main acting area,

I am not sure my antenna system will work, so I have to be prepared to add antennas, would the PWS DB series multicupler do the job? What else might I try?
Leaky cable?

Thanks
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6670
  • Audio Plumber
Re: Multiable receive antennas
« Reply #1 on: March 06, 2018, 07:52:54 pm »

I have a case with the actors will be going under a large steal frame 8 high platform
Upstage away from the main acting area,

I am not sure my antenna system will work, so I have to be prepared to add antennas, would the PWS DB series multicupler do the job? What else might I try?
Leaky cable?

Thanks

I would go with the PWS DB series. I think there are other similar devices, but I have only used the 4x1 (many output) PWS coupler.

Mac
Logged

Henry Cohen

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 952
  • Westchester Co., NY, USA
Re: Multiable receive antennas
« Reply #2 on: March 06, 2018, 08:37:33 pm »

I agree with Mac in that the PWS DB series is the easiest drop in solution, and very effective for virtually all multiple receive antenna deployments. However, if you have a particularly intricate distributed antenna system with many branches, a piecemeal approach incorporating appropriate directional couplers, splitters, combiners and attenuators throughout the DAS will provide a better result.
Logged
Henry Cohen

CP Communications    www.cpcomms.com
Radio Active Designs   www.radioactiverf.com

Jason Glass

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 703
    • CleanWirelessAudio.com
Re: Multiable receive antennas
« Reply #3 on: March 07, 2018, 01:11:50 pm »

I have a case with the actors will be going under a large steal frame 8 high platform
Upstage away from the main acting area,

I am not sure my antenna system will work, so I have to be prepared to add antennas, would the PWS DB series multicupler do the job? What else might I try?
Leaky cable?

Thanks

A less expensive and quite effective option is the RF Venue 4 ZONE.  https://www.rfvenue.com/products/4-zone

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3236
  • Toronto
Re: Multiable receive antennas
« Reply #4 on: March 07, 2018, 02:44:19 pm »

A less expensive and quite effective option is the RF Venue 4 ZONE.  https://www.rfvenue.com/products/4-zone
That is very affordable!
Thanks for posting  :)
Logged
I don't care enough to be apathetic

ProSoundWeb Community

Re: Multiable receive antennas
« Reply #4 on: March 07, 2018, 02:44:19 pm »


Pages: [1]   Go Up
 



Page created in 0.057 seconds with 25 queries.