Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Doug Simon]

I have a QSC PLX 3002 power amp with a new strange problem.
When powered on, the main power light illuminates, then right away, the rest of lights light up as if there's high signal coming in, or it's clipping , and it "clicks", as if being turned off and on quickly. Thoughts?

[Mac Kerr]

I have a QSC PLX 3002 power amp with a new strange problem.
When powered on, the main power light illuminates, then right away, the rest of lights light up as if there's high signal coming in, or it's clipping , and it "clicks", as if being turned off and on quickly. Thoughts?

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac

[Mike Diack]

I have a QSC PLX 3002 power amp with a new strange problem.
When powered on, the main power light illuminates, then right away, the rest of lights light up as if there's high signal coming in, or it's clipping , and it "clicks", as if being turned off and on quickly. Thoughts?

You have a blown channel. If you continue to put power through it,
You'll have a blown channel AND a blown power supply.
Tech time.
M

[ProSoundWeb Community]