Greetings.
I play in a worship band for a small-ish church — sanctuary seats around 200, I think. We have a Roland M200i with a digital snake up near the pulpit.
We have been struggling to get monitoring right. We have one M48, which we connected to a wireless transmitter, but found we really wanted individual mixes, especially for the instrumentalists. We decided to go with individual headphone amps connected to the Aux outs on the snake for the instrumentalists, using SEND ON FADERS so the sound guy can adjust each mix, while keeping the singers on the wireless. It's working fairly well with a couple of oddities, one more severe than the other:
Some instruments are not coming through on some of the Aux outs. For instance, Aux Out 2 and Aux Out 3 cannot hear the drums. Aux Out 4 and Aux Out 5 cannot hear the keyboards.
We cannot figure out why this is happening or what setting could possibly effect it.
The other issue is that Channels 1-5 on the M48 seem locked to Aux 1-5. They get the same signal, and we can't figure out how to change that. That issue is secondary, though, and far less of a problem than the first issue.
Can anyone help?