Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bradford "BJ" James]

That's helpful. Thanks Douglas.

[Marc Sibilia]

If nothing else there is a difference between the series that need to be looked at.

From 01V96 Version 2—Owner’s Manual:

New Functions in 01V96 Version 2
The following functions have been added to the 01V96 as part of the upgrade of the firmware
from version 1.0 to version 2.0.
Aux Sends
• If an Aux Send is set to pre-fader, you can set the Pre point before or after channel mute.

I tried it on my 01V96 v2 and it does in fact allow muting without muting the AUX.

Marc

[Bradford "BJ" James]

Great. Thanks for the confirmation. I was actually advised today by a Yamaha "specialist" that mute channel and aux's would only be possible if set post fade. I knew that wasn't the case but didn't bother taking the time to dispute it.

[Douglas R. Allen]

From 01V96 Version 2—Owner’s Manual:

New Functions in 01V96 Version 2
The following functions have been added to the 01V96 as part of the upgrade of the firmware
from version 1.0 to version 2.0.
Aux Sends
• If an Aux Send is set to pre-fader, you can set the Pre point before or after channel mute.

I tried it on my 01V96 v2 and it does in fact allow muting without muting the AUX.

Marc

Thanks Marc as well.  I seem to remember they offered V2 as a free upgrade to the "original series" when it came out. I'll have to look around and see if its still available.

Douglas R. Allen

[ProSoundWeb Community]