ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Behringer X32 output issue  (Read 1434 times)

Jim Rapier

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Behringer X32 output issue
« on: December 05, 2017, 07:25:39 am »

I have just replaced our legacy board with a new Behringer X32 and have some recording quality issues. I am unable to increase the gain/volume on my recording level. The recording is set to L/R Pre EQ, is there a way to increase these levels without increasing speaker output? I appreciate any help that can be offered.
Logged

Keith Broughton

  • Hero Member
  • *****
  • Online Online
  • Posts: 2928
  • Toronto
Re: Behringer X32 output issue
« Reply #1 on: December 05, 2017, 08:56:24 am »

Changing to your real name, as forum rules require, will result in some replies that may help you.
Logged
I don't care enough to be apathetic

Riley Casey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1205
Re: Behringer X32 output issue
« Reply #2 on: December 06, 2017, 11:44:53 am »

Perfect use for a matrix.  In fact driving your speakers from matrices too allows you to not have room or speaker specific settings affect the record sends

... The recording is set to L/R Pre EQ, is there a way to increase these levels without increasing speaker output? ...

Brian Adams

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 326
    • Adams Production Services
Re: Behringer X32 output issue
« Reply #3 on: December 06, 2017, 12:42:08 pm »

You can also turn up (or down) the Record Trim in the menu, I think it goes 10-12dB both ways. I find that that's usually enough for me.
Logged
Brian Adams
Adams Production Services
Vermillion, SD
adamsproductionservices.com
Pages: [1]   Go Up
 


Page created in 0.059 seconds with 23 queries.