Had an interesting problem yesterday. QL5 doing a corporate band on in-ears. They are running there own mixes on ears and are very low maintenance. At some point I noticed that pressing cue button on any in or out also brought up vocals in the cue wedge. Cue a CH with nothing plugged in and vocals would show up in the cue wedge?!?
End of show we started tracing down the problem by turning off sends to mixes one by one. Turns out anything sent to mix bus 13 also showed up in the cue wedge. Mix 13 was set as a verb send to an internal FX. OMNI 13 was patched as the cue wedge. Muting any sends would mute the cross talk. However muting the mix bus 13 master did not mute the cross talk. Console should be on the latest firmware and SOP is to initialize before any new setup. No RIO or other Dante in use. We checked the patch and any place we could think of. Released cue and toggled cue follows last press.
We plan on contacting Yamaha but I was wondering if any one else had some thing like this happen.