Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mike Pyle]

If you specify what you need Rapco can punch one out for you.

[Franklin Benjamin]

I can't seem to find 19" panels for the 32A powercons. Does someone have a source? Looking at the drawing it doesn't look like they will fit the G series cutout. They require 1.2" holes, the G and Ds are around 0.95"....

(I really don't need yet another Greenlee punch!)

TIA,
Mike

Are you trying to remain single space for these?

I normally use middle atlantic FK2 panels.
https://www.middleatlantic.com/products/accessories/connector-panels/ucp-series-modular-panel-system.aspx

The 32A powercon looks like it will fit in the ones for the NL8MPRs.

https://www.middleatlantic.com/products/accessories/connector-panels/ucp-series-modular-panel-system/4sc1.aspx

[Mike Christy]

Thanks for all the replies guys.

Ive changed my plan a bit, instead of modding a steel rack panel, I'm going to use a 2U rack enclosure, it just makes more sense for what Im doing.

Although I still need to punch or drill to make holes, an aluminum front panel - on the enclosure I've targeted - will be easier to work with than steel. The mid-atlantic modular product Franklin posted is along the lines of my idea, just a bit cheaper!

Mike

[ProSoundWeb Community]