Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mike Christy]

I can't seem to find 19" panels for the 32A powercons. Does someone have a source? Looking at the drawing it doesn't look like they will fit the G series cutout. They require 1.2" holes, the G and Ds are around 0.95"....

(I really don't need yet another Greenlee punch!)

TIA,
Mike

[duane massey]

I have a set of Unibits that I use when I am just doing 1-2 holes in a panel.

[Bob Leonard]

I couldn't find anything Mike, and 1.250" is not a small hole.

By the way, when did they get electricity in Maine???

Maybe here;

http://www.penn-elcom.com/default.asp?MC=04070501&LG=EN&title=punched-rack-panels

[Mark Wilkinson]

The 8 pole speakon connector, STX series is 1.22" dia.
I got some plates from Penn Elcon punched for them.
Maybe that could work as far as hole size......but I'm guessing the mounting screws might be an issue....

[duane massey]

https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&order=EAScore%2Cf%2CEAFeatured+Weight%2Cf%2CSale+Rank%2Cf&q=step+bit

[Mike Christy]

https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&order=EAScore%2Cf%2CEAFeatured+Weight%2Cf%2CSale+Rank%2Cf&q=step+bit

Ya, Ive got one of those step bits, wonder if it'll work on 16 gauge...??... Maybe I'll try it...

There's some used 1 3/16" greenlees on evilbay, $15, that's not too bad I guess...

Ive got a drill press that I can do the screw holes, maybe thats what I should do.

Thanks guys!

[Mike Christy]

I couldn't find anything Mike, and 1.250" is not a small hole.

By the way, when did they get electricity in Maine???

Maybe here;

http://www.penn-elcom.com/default.asp?MC=04070501&LG=EN&title=punched-rack-panels

Very funny, we have water wheels, and D batteries...

[duane massey]

Step-bit will work fine. Cheap ones may not last as long as the expensive ones, but they will all go thru 16ga, especially if you use a little oil.

[Mike Christy]

Step-bit will work fine. Cheap ones may not last as long as the expensive ones, but they will all go thru 16ga, especially if you use a little oil.

Thanks, Ill try that on a spare panel. Will report back... - Mike

[John Fruits]

Have you considered finding someone locally with a CNC plasma cutter.  That might work.

[ProSoundWeb Community]