ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Line 6 XD-V75 for Wireless Measurement  (Read 12680 times)

Chris Eddison

  • Full Member
  • ***
  • Offline Offline
  • Posts: 112
Re: Line 6 XD-V75 for Wireless Measurement
« Reply #10 on: November 28, 2017, 09:39:13 AM »

I've got to add my 8 channels of V70/V55 to the list of Line6 woes in this thread.

I've had to modify both my aerials as the connectors are very fragile. Have one beltpack that I can only describe as occasionally going "rogue" - lots of noise on the channel and seems to bleed across on to adjacent mics (yes they're all in the same RF mode). Had to replace the battery door on 2 as the catch broke. Had to replace the board with the led's and buttons on as I had a battery get stuck and then burst in the very tight battery bay, bleeding gunk everywhere. Most recently one of the 4 pin mini xlr sockets snapped way down in the barrel. They're very flimsy plastic and i'm not overly surprised. Also most of my 4 pin mini xlr sockets now don't latch properly.

It's such a shame. They made a great sounding wireless system with loads of potential, but reliability just let it down. RF performance has always been rock solid too although it's still a but disconcerting to completely lose a channel as somebody leaves the stage and goes in to a dressing room, and makes for a stressful time before a show hoping that you can't see RF because they're through a wall, not because their pack has died!
Logged

Loren Miller

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 61
Re: Line 6 XD-V75 for Wireless Measurement
« Reply #11 on: November 30, 2017, 10:47:30 AM »

Comesouta equals the Gozinta.

Does anyone other than TJ know what these words mean? Miss you buddy!
Logged

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3531
  • Boston Metro North/West
    • Lynx Audio Services
Re: Line 6 XD-V75 for Wireless Measurement
« Reply #12 on: November 30, 2017, 11:21:14 AM »

Does anyone other than TJ know what these words mean? Miss you buddy!

What comes out is the same as what when in. Don’t over think it


Sent from my iPad using Tapatalk Pro
Logged
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

Loren Miller

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 61
Re: Line 6 XD-V75 for Wireless Measurement
« Reply #13 on: November 30, 2017, 11:43:24 AM »

What comes out is the same as what when in. Don’t over think it


Sent from my iPad using Tapatalk Pro

Ha. Had to stare at it for a second!!! Imslowa
Logged

TJ (Tom) Cornish

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4317
  • St. Paul, MN
Re: Line 6 XD-V75 for Wireless Measurement
« Reply #14 on: December 08, 2017, 09:07:55 AM »

Does anyone other than TJ know what these words mean? Miss you buddy!
A common criticism for me, unfortunately.  Sorry you left the frozen northland!
Logged

ProSoundWeb Community

Re: Line 6 XD-V75 for Wireless Measurement
« Reply #14 on: December 08, 2017, 09:07:55 AM »


Pages: 1 [2]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.048 seconds with 24 queries.