I have a Zildjian Gen16 I use for live performances along with a Roland TD 20 drum set. Like a fool, I decided to try the phone app just before I went on to play. After I plugged it in, it asked to update firmware. I allowed it to do so and it did. Then it added the cymbals. 99 to each channel. The Gen16 has a direct line out to the Yamaha 48 channel mixing board, as does the each V-Drum. It's firmware is current and up to date. Before I used the phone app and did update, it went to board, house PA speakers and my in - ear monitors fine. After the update, nothing. I plugged the in - ear monitors straight into the Gen16 and it worked fine. Could hear all the cymbals. I did not unplug the direct line out from the Gen16 prior to update. I've never used the Gen16 computer app. Should I have used it before I used the phone app? HELP!!! How can I fix this problem.? I need to get the cymbals back into the PA ASAP.
I'm hooking up a new Roland TD 50 module to V-Drums tomorrow. Can I go out of the Gen16 USB port to a digital USB port on the Roland and control Gen16 from Roland? Would this solve the sound out to PA problem? Any help you can give me will be deeply appreciated.
Regards,
Darrell Richardson