Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mike Caldwell]

I use this with my QU and either a AB168 or AR2412 or sometimes both, stranded, shielded CAT 5E.

http://www.cbicables.com/products/ultimate_cat_e.aspx

[Don T. Williams]

I was under the understanding that if the cable was "cat" certified, the actual makeup was irrelevant to performance.


Sent from my iPhone using Tapatalk Pro

David, you may be correct.  I think that solid CAT cable is inherently less reactive, but if it's certified at a specific category, it should meet the specification.  One discussion I saw recommended 100M maximum for solid and stated 80M was the limit for stranded cable for their particular product.  I have a auditorium that ran 500' runs of CAT5 (100M - 328' was the recommended maximum) and their X32 has been running flawlessly for several years.

[Andrew Broughton]

David, you may be correct.  I think that solid CAT cable is inherently less reactive, but if it's certified at a specific category, it should meet the specification.  One discussion I saw recommended 100M maximum for solid and stated 80M was the limit for stranded cable for their particular product.  I have a auditorium that ran 500' runs of CAT5 (100M - 328' was the recommended maximum) and their X32 has been running flawlessly for several years.

Just don't try that with Dante.

[William Schnake]

Sean, we run Horizon Digital Snakes.  All of our are 250' stranded with 10' removable tails from the reel that they are on.  We also have a couple that care 4 lines per snake run that we use for our Midas Pro plus light send to the stage.  These are also 250' stranded, however they are not on a reel.

We have used these for the past 4 years or so and never had a problem as of yet.

Bill

[ProSoundWeb Community]