ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: ensemble mic  (Read 4637 times)

g'bye, Dick Rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7424
  • Duluth
Re: ensemble mic
« Reply #20 on: August 10, 2017, 04:30:01 pm »

The TLM103 seems a little wider than many LDC.  Had an artist supplied 103 last night on a *pair* of guitar amps.  Worked surprisingly well in that application.

I've used the 103 for choral recording and been very happy with the outcomes.

Went looking for a polar plot.  Never saw one quite like this before:
Logged
Pay no attention to the man behind the curtain...

Lee Buckalew

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 1310
  • St. Louis, MO area
    • Pro Sound Advice, Inc.
Re: ensemble mic
« Reply #21 on: August 10, 2017, 06:39:57 pm »

Went looking for a polar plot.  Never saw one quite like this before:

Neumann typically shows only a half of each polar so there is less overlap. 
125 Hz, 250 Hz, 500 Hz, and 1 kHz are shown on the left side of the polar plot but would be symmetrically mirrored in actuality.
2 kHz, 4 kHz, 8 kHz, and 16 kHz are shown on the right side of the polar plot but would also be symmetrical in real life.

Lee
Logged
Lee Buckalew
Pro Sound Advice, Inc.
Pages: 1 2 [3]  All   Go Up
 


Page created in 0.033 seconds with 23 queries.