ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Telex BTR-800 C3  (Read 4775 times)

Ike Zimbel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 592
  • I'm not a newbie, I just play one on the internet!
    • Zimbel Audio Productions
Re: Telex BTR-800 C3
« Reply #10 on: June 05, 2017, 12:28:35 pm »

I've been told that Telex can still re-band those systems to be legal, but why bother?  Intercom doesn't need high fidelity or low latency, so newer systems are moving off into VHF (RAD), 1.9GHz (FreeSpeak), etc. to leave more UHF space for "legacy" UHF-R and PSM.

Agree with most of this BUT, latency in intercom, as well as how the side tone is derived can be of critical importance. If someone is giving a "Go" cue, or even more importantly a "STOP!" cue, latency can be a problem. An important thing to be aware of is that analog systems like BTR and Rad Com generate side-tone by making the full round trip from pack-to-base-station-to-pack virtually instantaneously, while IP based systems like Free Speak generate side-tone locally in the pack (because the latency would create an echo to the user). There are two critical issues with latter system: 1) when the person on the pack hears themselves say "Go" or "Stop" isn't, by some tens of milliseconds, when the rest of the PL hears it, and 2) there's no guarantee that the rest of the PL heard it anyway.
This is why choosing the type of wireless com to use can be very important when life safety is involved, say, for rigging and automation folks when a show involves flying people in-and-out or moving set pieces etc.
Full disclosure: I am the manufacturer's rep for Radio Active Designs in Canada.
Logged
~Ike Zimbel~
Wireless frequency coordination specialist.
Manufacturer's Representative (Canada)

Radio Active Designs
~416-720-0887~
ca.linkedin.com/pub/ike-zimbel/48/aa1/266

ProSoundWeb Community

Re: Telex BTR-800 C3
« Reply #10 on: June 05, 2017, 12:28:35 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.042 seconds with 23 queries.