ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: School Installation  (Read 2532 times)

John Uren

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
School Installation
« on: May 06, 2017, 04:28:06 PM »

We have just had two EV 400 watt speakers hard wired into our school performance area.
They are hooked up with a speakon jack.
That is all we have.
It is a small area.
I need recommendations on the proper mixer, cable to the speakon connector and good reliable headset wireless microphone.
The speakers are overkill for that area. It will mainly be used for speaking engagements. Sometimes for audio from a movie or computer source.
Any help would be greatly appreciated.
Thanks
John
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7317
  • Audio Plumber
Posting Rules
« Reply #1 on: May 06, 2017, 06:03:59 PM »

Any help would be greatly appreciated.
Thanks
John

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
Logged

Jean-Pierre Coetzee

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 862
  • Gauteng, South Africa
Re: School Installation
« Reply #2 on: May 07, 2017, 03:18:58 AM »

Would need a lot more information such as budget and such and you will likely get the advice to hire a consultant / av integrator since it seems your technical know how isn't great.

A drawing of the space is also usually quite useful

What model is those EV speakers that 400w could be peak or program power?

Have you got some sort of wireing diagram for the cabling already install/is there any cabling installed?

You say that 2 EV loudspeakers were just hard wired into your performance area, who did this and why don't you get that company/person to complete the rest of the installations
Logged
Audio Technician
Word & Life Church

"If you want "loud", then run a piece of sheet metal through a table saw------

If you want "watts"-then plug in a toaster"
- Ivan Beaver

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9444
  • Atlanta GA
Re: School Installation
« Reply #3 on: May 07, 2017, 07:57:15 AM »

We have just had two EV 400 watt speakers hard wired into our school performance area.
They are hooked up with a speakon jack.
That is all we have.

How do you end up with 2 speakers that are wired in and nothing else?

What other gear you need depends on what you plan on using the system for-how many inputs?  what type of inputs? mics-video-audio playback-instruments etc

Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

ProSoundWeb Community

Re: School Installation
« Reply #3 on: May 07, 2017, 07:57:15 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.073 seconds with 23 queries.