Newest version of System Engineer is available for download.
In Off Line mode you will see the arbitrary FIR functionality.
AFAIK the processor Timo used is new hardware, not a firmware update on the older models.
And if you want higher tap numbers, look elsewhere.
BTW drawing straight lines on the screen is pretty tempting, isnt it
Uwe
Thanks Timo and Uwe,
Yeah, I can see the offline FIR functionality added in the latest System Engineer,
but even with the new firmware, once online, there is no FIR capability.
AFAICT, all that happens from installing both on existing hardware, is losing LIR capability. So I'm rolling back System Eng and firmware...
I've been hoping the processor would be updated to keep the LIR implementation with automatic delay compensation between bands,
and also allow loading FIR files that get merged into the LIR file being used for crossover duty.
384 taps might work like this, if used just for driver correction, and put into the file on top of the linear phase crossover, .........maybe.
Tempting straight lines ??
Oh yeah! glad I finally grew out of making them such a desired goal
I've been a heavy user of the measurement-averaging capability built into FIR Designer.
Processed traces are never perfect anymore, but on and off axis traces sure do group better , huh ?