Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Lighting Forum

Android Only dmx Controller

<< < (4/4)

Dave Garoutte:
Oops, the DMXKing is in an install.  Im usinf the Enttec ODEmk2.

Brian Jojade:

--- Quote from: Scott Holtzman on April 20, 2024, 12:02:18 AM ---
I don't have Artnet or sACN fixtures I need regular DMX 3 or 5 pin.  Can you walk me through the signal chain using the wifi on the ipad, ipad only .

--- End quote ---

The app runs on the ipad.  It speaks  Art-Net or sACN, which gets sent over WIFI to your access point which connects to your ethernet network. You plug in your ethernet to DMX adaptor which reads that signal and converts it to standard DMX.  It's relatively simple.

 

Scott Holtzman:

--- Quote from: Brian Jojade on April 20, 2024, 05:21:47 PM ---The app runs on the ipad.  It speaks  Art-Net or sACN, which gets sent over WIFI to your access point which connects to your ethernet network. You plug in your ethernet to DMX adaptor which reads that signal and converts it to standard DMX.  It's relatively simple.

--- End quote ---


I get it.  Dave's PIC helped too.   I was overcomplicating it.


Do the Enttec controllers have to be the ODE series or will this work?  https://www.ebay.com/itm/276418826396



Brian Jojade:

--- Quote from: Scott Holtzman on April 20, 2024, 07:44:00 PM ---
I get it.  Dave's PIC helped too.   I was overcomplicating it.


Do the Enttec controllers have to be the ODE series or will this work?  https://www.ebay.com/itm/276418826396

--- End quote ---

Yes, that unit will work.  Be aware of the 7v input voltage.  9 volt supplies will blow it up. Ask me how I know. lol.

Navigation

[0] Message Index

[*] Previous page

Go to full version