ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Anyone Recognize this Driver?  (Read 4355 times)

Nick Enright

  • Full Member
  • ***
  • Offline Offline
  • Posts: 241
  • Detroit, MI
Anyone Recognize this Driver?
« on: April 28, 2017, 12:12:41 PM »

a friend of mine has a cabinet that this driver fit in, it shows no continuity, is there a re-cone? or alternately what driver is it and what are the specs?

Thanks!
Nick
Logged
Nick Enright
Owner / Engineer
Lyve Productions
Detroit, MI

Casey McDonald

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: Anyone Recognize this Driver?
« Reply #1 on: April 28, 2017, 12:44:02 PM »

a friend of mine has a cabinet that this driver fit in, it shows no continuity, is there a re-cone? or alternately what driver is it and what are the specs?

Thanks!
Nick

It looks like an older EV SRO 15B - but that's only going by what it "looks" like basket, magnet, etc.

Casey
Logged

Nick Enright

  • Full Member
  • ***
  • Offline Offline
  • Posts: 241
  • Detroit, MI
Re: Anyone Recognize this Driver?
« Reply #2 on: April 28, 2017, 01:14:49 PM »

It looks like an older EV SRO 15B - but that's only going by what it "looks" like basket, magnet, etc.

Casey

Thanks!
nick
Logged
Nick Enright
Owner / Engineer
Lyve Productions
Detroit, MI

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9534
  • Atlanta GA
Re: Anyone Recognize this Driver?
« Reply #3 on: April 29, 2017, 10:45:03 AM »

It looks like an older EV SRO 15B - but that's only going by what it "looks" like basket, magnet, etc.

Casey
I would agree that it looks like an old EV.  Model number-I'm not sure.

But EV did not have a lot of models of that type back then
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

Pete Erskine

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1456
    • Best Audio
Re: Anyone Recognize this Driver?
« Reply #4 on: April 29, 2017, 12:18:31 PM »

a friend of mine has a cabinet that this driver fit in, it shows no continuity, is there a re-cone? or alternately what driver is it and what are the specs?

Thanks!
Nick

Google T5558 cone

Logged
Pete Erskine
917-750-1134
www.bestaudio.com
[email protected]

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9534
  • Atlanta GA
Re: Anyone Recognize this Driver?
« Reply #5 on: April 29, 2017, 02:29:10 PM »

It looks like an older EV SRO 15B - but that's only going by what it "looks" like basket, magnet, etc.

Casey
The EV 15B had a smooth cone.

That one has ridges.  So that would indicate a 15L

HOWEVER-the part number on the cone is a Waldom-so it has a generic recone kit in it.

The EV15B and 15L parts fit either one.

But if remember correctly, those old EVs used a cupped spider.

The later (as in the 70s and later) ones used a flat spider.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3091
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: Anyone Recognize this Driver?
« Reply #6 on: April 30, 2017, 06:39:45 PM »

I'm going to say SRO without the can over the magnet.

ProSoundWeb Community

Re: Anyone Recognize this Driver?
« Reply #6 on: April 30, 2017, 06:39:45 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.033 seconds with 25 queries.