ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Warbling distortion on Marantz CDR420  (Read 2908 times)

Patrick Riley

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Warbling distortion on Marantz CDR420
« on: April 26, 2017, 05:51:40 PM »
I have 8 identical Marantz CDR420 recorders on a show recording meetings. They are all setup identically. 6 are crystal clear on playback, but 2 are introducing a faint warbling digital distortion. It does not show up in the live monitoring, only the recorded media upon playback. I think the problem is internal to the record deck itself since this model is older. Anyone else experience this problem? Suggestions?
Logged

Jordan Wolf

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1483
  • Location: Collingswood, NJ
Re: Warbling distortion on Marantz CDR420
« Reply #1 on: April 30, 2017, 01:16:57 AM »
Are you recording mp3 mono? There's a glitch that shows up with that combo - not during monitoring, but after playback of the recorded material. Lots of fun that one was...


Sent from my iPhone using Tapatalk
Logged
Jordan Wolf
<><

"We want our sound to go into the soul of the audience, and see if it can awaken some little thing in their minds... Cause there are so many sleeping people." - Jimi Hendrix

ProSoundWeb Community

Re: Warbling distortion on Marantz CDR420
« Reply #1 on: April 30, 2017, 01:16:57 AM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 24 queries.