ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Meyer UPA-1C  (Read 6300 times)

Mike Maki

  • Full Member
  • ***
  • Offline Offline
  • Posts: 197
Re: Meyer UPA-1C
« Reply #10 on: April 26, 2017, 06:36:16 PM »
This is some plots I made about 20 years ago. Unfortunately LMS didn't measure anything in the time domain but as others have said the phase alignment was done with all pass filters.
Logged

Landon Lewsaw

  • Full Member
  • ***
  • Offline Offline
  • Posts: 147
Re: Meyer UPA-1C
« Reply #11 on: April 29, 2017, 07:25:49 PM »
Quote from: Mike  Maki on April 26, 2017, 06:36:16 PM
This is some plots I made about 20 years ago. Unfortunately LMS didn't measure anything in the time domain but as others have said the phase alignment was done with all pass filters.

That's great, thanks.  At least I know the 1.6k crossover is right...
Logged

ProSoundWeb Community

Re: Meyer UPA-1C
« Reply #11 on: April 29, 2017, 07:25:49 PM »

Pages: 1 [2]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.038 seconds with 25 queries.