ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: AES cable  (Read 1306 times)

Colelofink

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
    • sonuslive.com
AES cable
« on: March 03, 2017, 03:25:32 pm »

Does anyone have a good source to purchase gepco 5596M? Or is there something else you might prefer? Must survive touring use.

Needs
- 110 ohm Impedance
- 24 AWG or lower
- braided shield
- flexible but still heavy duty
- able to use on long runs (100'-330')
« Last Edit: March 03, 2017, 04:09:46 pm by Colelofink »
Logged

Justice C. Bigler

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 2268
  • Somewhere between the Atlantic and Pacific
    • My homepage
Re: AES cable
« Reply #1 on: March 03, 2017, 03:39:45 pm »

Have you checked into 3-pin DMX cable? It's the same stuff, and probably available in higher quantities and lower prices since the sparkies use so much more of it.
Logged
Justice C. Bigler
www.justicebigler.com
Head Audio/A1 Blue Man Group North American Tour

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1596
  • So. Dak.
    • Sturz Audio
Re: AES cable
« Reply #2 on: March 03, 2017, 05:13:25 pm »

Have you checked into 3-pin DMX cable? It's the same stuff, and probably available in higher quantities and lower prices since the sparkies use so much more of it.

Or just Cat5e
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

ProSoundWeb Community

Re: AES cable
« Reply #2 on: March 03, 2017, 05:13:25 pm »


Pages: [1]   Go Up
 



Page created in 0.045 seconds with 23 queries.