ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Lake LM44 FIR Coefficient Entry  (Read 2771 times)

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1966
  • So. Dak.
    • Sturz Audio
Lake LM44 FIR Coefficient Entry
« on: February 12, 2017, 09:27:01 PM »

I did a search and found that the LM did not support direct entry of FIR coefficients.  Does anyone know if that is still the case?


Sent from my iPad using Tapatalk Pro
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Hayden J. Nebus

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 637
  • Richmond, VA
Re: Lake LM44 FIR Coefficient Entry
« Reply #1 on: February 15, 2017, 01:59:42 PM »

I did a search and found that the LM did not support direct entry of FIR coefficients.  Does anyone know if that is still the case?


Sent from my iPad using Tapatalk Pro

This is still the case.

If you have somewhere around $1500 and an extra RU, something like the Prism 4x4 will give you economical FIR horsepower (12 ch of 1024 tap filters) , and you can use Dante for handoff to/from the LM.
Logged

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1966
  • So. Dak.
    • Sturz Audio
Re: Lake LM44 FIR Coefficient Entry
« Reply #2 on: February 15, 2017, 04:44:59 PM »

I already have plenty of BSS London which will do tons of FIR, just looking to experiment with these Lakes.


Sent from my iPhone using Tapatalk Pro
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

ProSoundWeb Community

Re: Lake LM44 FIR Coefficient Entry
« Reply #2 on: February 15, 2017, 04:44:59 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 23 queries.