ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Suggestions for SMAART measurement mic.  (Read 9817 times)

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8752
  • Atlanta GA
Re: Suggestions for SMAART measurement mic.
« Reply #20 on: March 03, 2017, 07:59:43 am »

Even without the correction, performing a phase alignment of subs would be good enough with any of the uncorrected mics.
If the only purpose is "phase alignment" then any cheap mic from any manufacturer would work just fine. Dynamic or condenser.

Since you are using a SINGLE MIC, and looking at the difference in phase response between different loudspeakers, the difference will be the same.

A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

Pages: 1 2 [3]  All   Go Up

Page created in 0.031 seconds with 24 queries.