ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2 3  All   Go Down

Author Topic: heavy duty microphone cable  (Read 8912 times)

Weogo Reed

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 369
  • Western NC,
    • LiveEdge
heavy duty microphone cable
« on: October 07, 2016, 04:17:10 PM »

Hi Folks,

What microphone cables have you found that stands up to being stepped on and rolled over  - on a concrete stage?
Yellow Jackets aren't an option.

Thanks and good health,  Weogo
Logged

William Schnake

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 592
    • Schnake Sound & Light
Re: heavy duty microphone cable
« Reply #1 on: October 07, 2016, 04:18:58 PM »

Hi Folks,

What microphone cables have you found that stands up to being stepped on and rolled over  - on a concrete stage?
Yellow Jackets aren't an option.

Thanks and good health,  Weogo
We use Rapco/Horizon Road Hawg cables.  Never had a problem.

Bill
Logged
Bill Schnake - Owner Schnake Sound & Light

Avid/Crown/EAW/EV/Midas/RCF/Shure/Yamaha

schnakesound.com

Riley Casey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2081
  • Wash DC
Re: heavy duty microphone cable
« Reply #2 on: October 07, 2016, 04:26:14 PM »

Sturdier than Belden 8412?

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23783
  • Wichita, Kansas USA
Re: heavy duty microphone cable
« Reply #3 on: October 07, 2016, 04:30:47 PM »

Sturdier than Belden 8412?

This.  Don't forget the genuine Cannon XLR3-11C female connector...
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Weogo Reed

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 369
  • Western NC,
    • LiveEdge
Re: heavy duty microphone cable
« Reply #4 on: October 07, 2016, 04:32:25 PM »

Hi Riley,

Yep, 8412 is kinda the standard.
Just checking if there is anything else I ought to be looking at.

Thanks and good health,  Weogo


Sturdier than Belden 8412?
Logged

Riley Casey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2081
  • Wash DC
Re: heavy duty microphone cable
« Reply #5 on: October 07, 2016, 05:11:31 PM »

Belden used to make something heavier but I think it went out out production years ago.  It was more like coiling 12/3 though.  Not something I'd want to carry a case full of.

Hi Riley,

Yep, 8412 is kinda the standard.
Just checking if there is anything else I ought to be looking at.

Thanks and good health,  Weogo

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9538
  • Atlanta GA
Re: heavy duty microphone cable
« Reply #6 on: October 07, 2016, 05:53:36 PM »

Sturdier than Belden 8412?
Yeah  8412 is harder to deal with (shield) but will last forever, handle easier etc.

It also resists breakage because the conductors are larger than most other mic cables.

It costs more-but for a reason.  Good stuff.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

Scott Holtzman

  • Hero Member
  • *****
  • Online Online
  • Posts: 7567
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: heavy duty microphone cable
« Reply #7 on: October 07, 2016, 06:08:58 PM »

Had good luck with Clark FieldFlex also http://www.clarkwire.com/cableFF220.htm
Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3422
    • HappyMac Digital Electronics
Re: heavy duty microphone cable
« Reply #8 on: October 07, 2016, 06:15:35 PM »

Belden 8412, no question.  It's made out of rubber for the outside jacket AND the inside insulators, with cloth strain relief and a full braided shield.  Pretty much the most durable standard mic cable you're ever going to come across.

I have Belden 8412 cables that are older than I am.  After about 50 years, the rubber does start getting a little stiff, especially at the ends of the cables. I had to cut about a foot off of those 50 year old cables to get to good stuff, and they are back in business.  I can live with a 50 year lifespan on a cable that gets used every single week.
Logged
Brian Jojade

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1467
Re: heavy duty microphone cable
« Reply #9 on: October 07, 2016, 08:07:16 PM »

Hi Folks,

What microphone cables have you found that stands up to being stepped on and rolled over  - on a concrete stage?
Yellow Jackets aren't an option.

Thanks and good health,  Weogo

As well as Belden 8412, I have had an excellent run with Canare Star Quad Microphone Cable (L-4E6S / L-4E5C) http://www.canare.com/ProductItemDisplay.aspx?productItemID=53
Logged

ProSoundWeb Community

Re: heavy duty microphone cable
« Reply #9 on: October 07, 2016, 08:07:16 PM »


Pages: [1] 2 3  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.036 seconds with 23 queries.