ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 ... 3 4 [5]   Go Down

Author Topic: Uhfr vs Ulxd  (Read 22001 times)

Aram Piligian

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 89
Re: Uhfr vs Ulxd
« Reply #40 on: October 06, 2016, 09:11:48 AM »

Somehow I totally missed your screenshots! 

I'll have to play with this again when I get a chance, but I do remember trying to get the delay dialed in as accurately as possible and couldn't really get it flat.  And besides, if it takes THAT much tweaking to get a useful measurement out of it, I might as well just run a cable and KNOW that I'm looking at solid data.
Logged

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2253
Re: Uhfr vs Ulxd
« Reply #41 on: October 06, 2016, 10:17:01 AM »

There's often a sample rate mismatch between SMAART internals and a digital device under test - so it's basically just about impossible to set the delay exactly.  But usually that just means the top octave phase trace gently curves up or down.  The ULXD trace (I got the same thing) is some other weirdness.
Logged

Dan Currie

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 86
Re: Uhfr vs Ulxd
« Reply #42 on: October 26, 2016, 07:39:59 PM »


The graphics when using ULXD's via DANTE on a CL5 are kind of neat.  Note: 488.25 on the desk is really 488.025mhz. Battery life and antenna reception is a plus.
Logged

Jordan Wolf

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1483
  • Location: Collingswood, NJ
Re: Uhfr vs Ulxd
« Reply #43 on: October 27, 2016, 12:42:53 PM »


The graphics when using ULXD's via DANTE on a CL5 are kind of neat.  Note: 488.25 on the desk is really 488.025mhz. Battery life and antenna reception is a plus.
Now THAT is cool!


Sent from my iPhone using Tapatalk
Logged
Jordan Wolf
<><

"We want our sound to go into the soul of the audience, and see if it can awaken some little thing in their minds... Cause there are so many sleeping people." - Jimi Hendrix

Dan Currie

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 86
Re: Uhfr vs Ulxd
« Reply #44 on: January 04, 2017, 05:28:39 PM »

ULXD G50 Bandpass

Logged

ProSoundWeb Community

Re: Uhfr vs Ulxd
« Reply #44 on: January 04, 2017, 05:28:39 PM »


Pages: 1 ... 3 4 [5]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.032 seconds with 20 queries.