Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Alan Carroll]

Hi, I've just made the move from a Yamaha analogue mixer to an X32 Producer and I've wasted some time today trying to figure out how to toggle effects on and off.  I have assigned effects to channels 15 and 16 to apply to mics and one mic in particular needs to have the effects turned off frequently throughout the night for announcements.
I can see from the Operational Overview that custom assignments can be created 'to control a parameter like the lead vocalist's reverb on/off status', but I just can't put it into practice. I want to apply the switch to set B. I've tried many different settings, but just don't seem to be able achieve the result.  I'm hopeful someone may take the time to set me straight on Assign, or even whether that is the best way to do what I want to do.
Thank you.

[Scott Olewiler]

Hi, I've just made the move from a Yamaha analogue mixer to an X32 Producer and I've wasted some time today trying to figure out how to toggle effects on and off.  I have assigned effects to channels 15 and 16 to apply to mics and one mic in particular needs to have the effects turned off frequently throughout the night for announcements.
I can see from the Operational Overview that custom assignments can be created 'to control a parameter like the lead vocalist's reverb on/off status', but I just can't put it into practice. I want to apply the switch to set B. I've tried many different settings, but just don't seem to be able achieve the result.  I'm hopeful someone may take the time to set me straight on Assign, or even whether that is the best way to do what I want to do.
Thank you.

No one can help you until you change your display name to your real name per the forum rules.

[Alan Carroll]

oops, sorry, thought it was automatic.

[Mark Oakley]

Aren't there Mute buttons on the Effect Return channels?

-Mark

[Alan Carroll]

Aren't there Mute buttons on the Effect Return channels?

-Mark

Yes there are.  Guess I was looking for a shortcut.

[David Sturzenbecher]

Assign the FX returns to mute group


Sent from my iPhone using Tapatalk

[John P. Farrell]

You could use a Mute Group, DCA, Bus.....there are a lot of options.  If your vocals and FX are returned to the same layer you could just mute them there too. 

[Tim McCulloch]

Hi, I've just made the move from a Yamaha analogue mixer to an X32 Producer and I've wasted some time today trying to figure out how to toggle effects on and off.  I have assigned effects to channels 15 and 16 to apply to mics and one mic in particular needs to have the effects turned off frequently throughout the night for announcements.
I can see from the Operational Overview that custom assignments can be created 'to control a parameter like the lead vocalist's reverb on/off status', but I just can't put it into practice. I want to apply the switch to set B. I've tried many different settings, but just don't seem to be able achieve the result.  I'm hopeful someone may take the time to set me straight on Assign, or even whether that is the best way to do what I want to do.
Thank you.

Hi Alan-

I'm not sure what you're trying to do that can't be accomplished with muting either the EFX send or return, or muting a group or VCA if the FX return channel is assigned to one of those.

Is this about some workflow issue?  Perhaps "gee the returns are on layer 4 and I'm spending most of my time of layer 1" thing?

The Producer does not have dedicated Mute Group controls.  As I'm not familiar with the Producer, perhaps someone else can tell us if the "Assign" buttons can be made into either Mute Group control or can be assigned just to mute a specific input (or FX return).

[John L Nobile]

I always assign verb mute to the programmable switches and decay time to the rotary encoder. Will use it for level too if I don't have a spare VCA.
Those 3 pages of assignable buttons/encoders are very useful for me.

[Alan Carroll]

Thank you for the help and suggestions guys.
I got my Assign Buttons set up.
I was about to take a couple of pics of the screen setups in Assign, figuring that whatever I was doing wrong would show up to someone who knew, when I decided to have another try at configuring it, (slept on it ) Where I was going wrong was the first column, Select Control, I should have been on Button 1, not Encoder 1.  I'm sure I tried that yesterday, but my other settings may have been wrong at the time.
I figured Mute Groups was a good suggestion, but trying to set one up caused me some frustration. Behringer Wiki information, supposedly specific for the Producer, told me that I had Mute Group buttons on my board
that would set a Mute Group.  Well of course that's not so, and I still haven't figured out how to set a Mute Grup using the rotary knobs.
 
Yes Tim, it's about workflow, the hands can be pretty busy when I make announcements and I'd prefer
not to have to navigate layers at that moment, and John, your comments convinced me that Assign was the way to go, so I persevered.
I'm interested also in your comments about assigning decay time to a rotary encoder and level control John, but for now I'd better get my head into the next relevant task, monitor set ups.

Thanks again for the help guys, much appreciated, I have a lot to learn, but going digital is very exciting.

[Scott Holtzman]

Thank you for the help and suggestions guys.
I got my Assign Buttons set up.
I was about to take a couple of pics of the screen setups in Assign, figuring that whatever I was doing wrong would show up to someone who knew, when I decided to have another try at configuring it, (slept on it ) Where I was going wrong was the first column, Select Control, I should have been on Button 1, not Encoder 1.  I'm sure I tried that yesterday, but my other settings may have been wrong at the time.
I figured Mute Groups was a good suggestion, but trying to set one up caused me some frustration. Behringer Wiki information, supposedly specific for the Producer, told me that I had Mute Group buttons on my board
that would set a Mute Group.  Well of course that's not so, and I still haven't figured out how to set a Mute Grup using the rotary knobs.
 
Yes Tim, it's about workflow, the hands can be pretty busy when I make announcements and I'd prefer
not to have to navigate layers at that moment, and John, your comments convinced me that Assign was the way to go, so I persevered.
I'm interested also in your comments about assigning decay time to a rotary encoder and level control John, but for now I'd better get my head into the next relevant task, monitor set ups.

Thanks again for the help guys, much appreciated, I have a lot to learn, but going digital is very exciting.

I assign my an FX mute group.  Nothing sounds worse than someone chatting away between numbers and having the delay on.  It's workflow.  Lights to idle scene, mute fx, then tap tempo the delays, unmute and run your scene and a whatever bridge in the song is starting by the time my right hand is done with the unmute and tempo. 

Lather...rinse..repeat

[John L Nobile]

There's a ton and a half of youtube video tutorials for the X32. Try them if you have any more issues.

[Alan Carroll]

True enough. I watched some before I got my board to give me a heads up.  However, it can be hard to find relevant information on specifics. For example, I didn't find anything on Assign, and the stuff I saw about Mute Groups was for the X32 full, which is different to the Producer.  In that case this forum was more helpful  .

[Scott Olewiler]

True enough. I watched some before I got my board to give me a heads up.  However, it can be hard to find relevant information on specifics. For example, I didn't find anything on Assign, and the stuff I saw about Mute Groups was for the X32 full, which is different to the Producer.  In that case this forum was more helpful  .

I'm just curious what layer you typically have up on the right 8 faders?   I always have Bus 9-16 which is 4 sub groups and my master effects sends so it's easy to mute the effects for my work flow.

[Alan Carroll]

I'm just curious what layer you typically have up on the right 8 faders?   I always have Bus 9-16 which is 4 sub groups and my master effects sends so it's easy to mute the effects for my work flow.

Yes, that's a good suggestion.  Having only had the board a few days nothing is typical  .

[ProSoundWeb Community]