Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Scott Slater]

Hello,

I am going to be running an ITech 9000HD in stereo mode with a pair of Danley SM80s.  Does anyone have the proper current limiter and suggested crossover settings for this particular amplifier / speaker combo, with TH118s under them?

FYI:  I will be running 4 TH118s, each pair on their own ITech 8000 (not bridged).  I believe the crossover on these for the last set of main speakers is set at 100 Hz LPF / 25 Hz HPF.

If you have good settings for 8000 / TH118s (1 per channel, not bridged) that you could provide, that would be helpful too.

Thanks in advance.

[Tim McCulloch]

Hello,

I am going to be running an ITech 9000HD in stereo mode with a pair of Danley SM80s.  Does anyone have the proper current limiter and suggested crossover settings for this particular amplifier / speaker combo, with TH118s under them?

FYI:  I will be running 4 TH118s, each pair on their own ITech 8000 (not bridged).  I believe the crossover on these for the last set of main speakers is set at 100 Hz LPF / 25 Hz HPF.

If you have good settings for 8000 / TH118s (1 per channel, not bridged) that you could provide, that would be helpful too.

Thanks in advance.

WWIS?  What Would Ivan Say?

You have to ask him...   But I think Danley has some appropriate numbers...

[ProSoundWeb Community]