ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: IAS 5.0.4.0. and Senn G3 IAS 516-558  (Read 1721 times)

Mike Kahrs

  • Newbie
  • *
  • Offline Offline
  • Posts: 43
IAS 5.0.4.0. and Senn G3 IAS 516-558
« on: April 19, 2016, 05:28:13 pm »

I was just presented with a Sennheiser EW 300 IEM, US model to fold into my coordination.  The unit was set to TX on 516.025, however on my version of IAS, the lowest comparable Sennheiser units start at 518MHz for band A.  The web site for Sennheiser shows 516-558.

WWB6 shows 516MHz, however I have too many freqs to start over with WWB6.  My solution was to test a Generic 516.025 freq.

Any suggestions?

Thanks,

Mike

Logged
Why know when you can guess...

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1399
    • Best Audio
Re: IAS 5.0.4.0. and Senn G3 IAS 516-558
« Reply #1 on: April 19, 2016, 06:33:09 pm »

I was just presented with a Sennheiser EW 300 IEM, US model to fold into my coordination.  The unit was set to TX on 516.025, however on my version of IAS, the lowest comparable Sennheiser units start at 518MHz for band A.  The web site for Sennheiser shows 516-558.

WWB6 shows 516MHz, however I have too many freqs to start over with WWB6.  My solution was to test a Generic 516.025 freq.

This answer is for IAS AND WWB.   You can make your own custom entry by creating a copy of the regular entry and then editing it.   

Make your copy from the EW300 G2A or G3A
« Last Edit: April 19, 2016, 06:41:12 pm by Pete Erskine »
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Mike Kahrs

  • Newbie
  • *
  • Offline Offline
  • Posts: 43
Re: IAS 5.0.4.0. and Senn G3 IAS 516-558
« Reply #2 on: April 25, 2016, 02:37:51 pm »

>> Make your copy from the EW300 G2A or G3A


Thanks, Pete.  In IAS I was unable to populate the new special freq band with freqs.  "Generic" worked well, so thanks.

I'll revisit it next week when I have more time.

Busted the band's monitor guy for not checking his antenna wiring before telling me my IEM freqs were no good, so the day wasn't a total loss.

Mike
Logged
Why know when you can guess...

ProSoundWeb Community

Re: IAS 5.0.4.0. and Senn G3 IAS 516-558
« Reply #2 on: April 25, 2016, 02:37:51 pm »


Pages: [1]   Go Up
 



Page created in 0.055 seconds with 23 queries.