Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Console Connectivity Solutions
need help connecting QL5 to DVS
Kirby Yarbrough:
Trying to get a Windows 10 laptop running DVS 3.7.4.2 to connect with a QL5, firmware 3.11.
I use a static IP address (100.100.1.130) on the QL5 and have a static IP address of 100.100.1.120 for the Ethernet adaptor on the laptop. The network connection between the laptop and QL5 seems to work fine, at least as evidenced by correct connection and operation of the QL Editor. I'm using a plain cat5 (6') cable between the laptop and the QL5. The same IP address scheme works with my WAP set to 100.100.1.1 and QL Stagemix on an iPad set to 100.100.1.100, with the WAP plugged into the QL5. Subnet mask on all devices is 255.255.255.0.
I've followed the steps described in the QL Series Live Recording Guide with Nuendo Live (http://download.yamaha.com/api/asset/file/?language=en&site=ae.yamaha.com&asset_id=65124). DVS does pick up the laptop's IP address (as does Dante Controller for its primary interface when I run that, but the laptop never appears on the QL5's Device Mount page within Dante Setup. I can set it up using the laptop's Windows name in the DVS tab within the the Dante Offline, and that device appears in the QL5 Nuendo Live Setup DVS Device List and I can set the device IP address to 100.100.1.120, but Dante Controller still doesn't show anything but the laptop.
Mac Kerr:
--- Quote from: Kirby Yarbrough on March 20, 2016, 09:00:35 PM ---Trying to get a Windows 10 laptop running DVS 3.7.4.2 to connect with a QL5, firmware 3.11.
I use a static IP address (100.100.1.130) on the QL5 and have a static IP address of 100.100.1.120 for the Ethernet adaptor on the laptop. The network connection between the laptop and QL5 seems to work fine, at least as evidenced by correct connection and operation of the QL Editor. I'm using a plain cat5 (6') cable between the laptop and the QL5. The same IP address scheme works with my WAP set to 100.100.1.1 and QL Stagemix on an iPad set to 100.100.1.100, with the WAP plugged into the QL5. Subnet mask on all devices is 255.255.255.0.
I've followed the steps described in the QL Series Live Recording Guide with Nuendo Live (http://download.yamaha.com/api/asset/file/?language=en&site=ae.yamaha.com&asset_id=65124). DVS does pick up the laptop's IP address (as does Dante Controller for its primary interface when I run that, but the laptop never appears on the QL5's Device Mount page within Dante Setup. I can set it up using the laptop's Windows name in the DVS tab within the the Dante Offline, and that device appears in the QL5 Nuendo Live Setup DVS Device List and I can set the device IP address to 100.100.1.120, but Dante Controller still doesn't show anything but the laptop.
--- End quote ---
What is the Dante IP address of the QL? What is the control port IP address? They are not the same. If left to their own devices the primary Dante network will all be in the 169.254.x.x range, and the secondary network will be in the 172.31.x.x range. I have had the most stable network when letting Dante assign the IP addresses. Unless you are exposing your network to the outside world I see no reason to not let Dante assign the addresses. You will have to set your laptop so that DVS is on a port with a 169.254.x.x address since DVS is only on the primary network.
Mac
Kirby Yarbrough:
--- Quote from: Mac Kerr on March 20, 2016, 10:57:09 PM ---What is the Dante IP address of the QL? What is the control port IP address? They are not the same. If left to their own devices the primary Dante network will all be in the 169.254.x.x range, and the secondary network will be in the 172.31.x.x range. I have had the most stable network when letting Dante assign the IP addresses. Unless you are exposing your network to the outside world I see no reason to not let Dante assign the addresses. You will have to set your laptop so that DVS is on a port with a 169.254.x.x address since DVS is only on the primary network.
Mac
--- End quote ---
Thanks Mac. I am still missing something. I've reverted to the default IP address scheme:
Laptop network (ethernet) IP address is now 169.254.1.120, (255.255.255.0)
DVS IP address is the same (169.254.1.120), which is also shown in Dante Controller (and Controller correctly reflects DvsWin 3.7.4.2)
QL5 network IP address is now 169.254.1.130 (and laptop connects to QL5 correctly using QL Editor)
QL5 Recorder -> Nuendo Live IP address is now 169.254.1.120 (same as the laptop)
DVS does not appear in the QL5 Dante setup Online Device List. In the Dante Setup page, the left side System status LED is solid green, but the right side Sync LED is blinking twice.
How can I restore or reset DVS and the QL5 to all of Dante's default IP addresses? My manual attempt to do that is not working.
Mac Kerr:
--- Quote from: Kirby Yarbrough on March 21, 2016, 10:34:40 AM ---DVS does not appear in the QL5 Dante setup Online Device List. In the Dante Setup page, the left side System status LED is solid green, but the right side Sync LED is blinking twice.
How can I restore or reset DVS and the QL5 to all of Dante's default IP addresses? My manual attempt to do that is not working.
--- End quote ---
I assume you mean DVS is not showing up as a mounted device on the QL. You may have to mount it manually. Go to the mount device tab, look at the recognized devices tab, DVS should be a recognized device, add it to a device slot on the console (where a Rio would go) and mount it. It should come up.
Mac
Rob Spence:
--- Quote from: Mac Kerr on March 21, 2016, 12:18:01 PM ---I assume you mean DVS is not showing up as a mounted device on the QL. You may have to mount it manually. Go to the mount device tab, look at the recognized devices tab, DVS should be a recognized device, add it to a device slot on the console (where a Rio would go) and mount it. It should come up.
Mac
--- End quote ---
Looking at the back of the desk, there are 3 network connectors. One is the console and is how you are operating it with the editor. I don't believe there is Dante on that connector (Mac, correct me if I am wrong).
The other two connectors are the Dante network.
I suggest if you want to both control the console and use DVS, you need a simple gigabit switch (without the green power saving). Connect the laptop to it and the primary Dante port and the console port.
Sent from my iPad using Tapatalk HD
Navigation
[0] Message Index
[#] Next page
Go to full version