Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stuhughes2]

Hi, I have a seinheiser ew100 wireless microphone, it's about 10 years old. I was wandering if I could use my same reciever with any model of Sennheiser microphones ie the new wireless 935. Thanks in advance

Sent from my SM-G920F using Tapatalk

[Rob Spence]

Hi, I have a seinheiser ew100 wireless microphone, it's about 10 years old. I was wandering if I could use my same reciever with any model of Sennheiser microphones ie the new wireless 935. Thanks in advance

Sent from my SM-G920F using Tapatalk

The new mic has to be in the same freq band as the receiver.
Look at the back or bottom of your receiver and see what band it is. It may be a letter such as "A" or "C".


Sent from my iPad using Tapatalk HD

[Ray Aberle]

And for the most part, a first generation Sennheiser will be compatible with a new one, like Rob said.

After ensuring you have the correct frequency, keep in mind that certain features (like pilot tone, or sending the battery level to the receiver) won't be available on your older receiver.

I've got a G1 bodypack/receiver combo, and have used it successfully with G3 units. Just not in a long, long time... maybe I should sell it... haha.

If you're buying used, watch out for A2, B2, or G2 (By the way, C frequencies are in the 700MHz range and can NOT be used legally in the United States anymore) -- the 2-variants on the frequency set have a different internal spread of available frequencies, as they were released right around the time that the G3 line was introduced so Sennheiser could closely match the existing bands quickly. They do work together, you'll just find different preset groups on the unit. (So it's harder to mix and match standard and -2 frequency group variants.)

Hope that made sense.

-Ray