Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Wireless and Communications

A basic network diagram for sound

<< < (3/7) > >>

Bob Leonard:

--- Quote from: Rob Spence on February 07, 2016, 05:29:53 PM ---I know there is no modem. I never ever even referred to one.

Turning off SSID is not valid security. There are lots of tools to see the network anyway. Use WAP security at least. I simply choose an SSID that won't attract people.


Sent from my iPad using Tapatalk HD

--- End quote ---

Correct, turning off the SSID broadcast ALONE is not good security. Turning off the SSID will only keep your network from being visible to other casual users and drive by's. Very common practice in the business world. Out of site is mostly out of mind.

Bob Charest:

--- Quote from: Bob Leonard on February 06, 2016, 07:12:39 PM ---I thought after the many conversations pertaining to basic connectivity and networking I might provide an easy to follow and simple EXAMPLE of what a small sound network could be...
--- End quote ---

Hi Bob,

Really useful graphic - just great! Thank you!

Best regards,
Bob Charest

Scott Holtzman:

--- Quote from: Bob Leonard on February 07, 2016, 09:03:36 PM ---I suppose it would have been more correct to state it's not a DSL connector, T1 port or WIC adapter. The fact is that on this particular SOHO device the port is simply another switched port. Any standard patch cable will work.

--- End quote ---

The WAN port can't be in the same network as the LAN.  That would never work.  The WAN port has a DHCP client, the LAN a DHCP server for starters. 

The WAN port is the input to the router, the LAN may or may not have a convenience switch, most do.

Keith Broughton:
Great post!
Thanks Bob :)

Bob Leonard:

--- Quote from: Scott Holtzman on February 08, 2016, 03:57:38 AM ---The WAN port can't be in the same network as the LAN.  That would never work.  The WAN port has a DHCP client, the LAN a DHCP server for starters. 

The WAN port is the input to the router, the LAN may or may not have a convenience switch, most do.



--- End quote ---

That would be understood. The point is that Rob is able to attach to his house network directly, not the case if it were a WIC card or DSL connection. You're splitting hairs and the intent is to keep the post simplistic.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version