Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Nick Enright]

Does anyone recognize this panel? it's ITE I believe, and asks for type eqp breaker. They snap in.

my search says that Siemens EQ is the same breaker and will fit.

What does the combined intel here say?

[Cailen Waddell]

That panel appears to have no ground.  Assuming if you were to put a breaker in, you would have a real electricians do it?  The lack of a ground is concerning.


Sent from my iPhone using Tapatalk

[Mark Cadwallader]

That panel appears to have no ground.  Assuming if you were to put a breaker in, you would have a real electricians do it?  The lack of a ground is concerning.


Sent from my iPhone using Tapatalk

But... but... but I see a couple of green wires in the panel.... (End sarcasm/attempt at black humor)

[Tom Bourke]

What breaker?  I think the proper answer is what ever the replacement panel takes.

BTW does that outlet on the right have a ground wire to it?

[Stephen Swaffer]

I believe the conduit could possibly qualify as a ground/egc.  I don't like doing it that way.

Other breakers might fit-but will not be "listed" for the purpose-so really don't meet code.

I agree with Tom-a replacement panel would be a very good idea-and add an EGC as the same time.

[frank kayser]

I believe the conduit could possibly qualify as a ground/egc.  I don't like doing it that way.

Other breakers might fit-but will not be "listed" for the purpose-so really don't meet code.

I agree with Tom-a replacement panel would be a very good idea-and add an EGC as the same time.

I'm assuming you wish to replace a breaker and not add one, as there seems to be no room at the inn.

[Nick Enright]

I'm assuming you wish to replace a breaker and not add one, as there seems to be no room at the inn.

I wish I had better options. 

that's what I wish. Thanks everyone for the suggestions.

[Erik Jerde]

There's a lot of different ITE panels.  I've got a client site that has mid breaker bolt-on and other ones that use bottom breaker bolt-on.  Gotta take that protective panel off to see the guts and know what you're working with.

As to the grounding, if this is a sub panel and everything is connected via EMT then that provides your ground path.  Just means whoever put in those ground lines doesn't know what they are doing (assuming green means ground of course).  The panel probably would benefit from a ground bus bar attached along one of the sides.  It's easy to do but they don't make allowances for it in the ITE panel design.

[William Schnake]

I wish I had better options. 

that's what I wish. Thanks everyone for the suggestions.

Nick, sorry I can't help you with the breaker, however free advice...meter and meter again before you do anything.  This panel is a mess.

Bill

[Nick Enright]

Nick, sorry I can't help you with the breaker, however free advice...meter and meter again before you do anything.  This panel is a mess.

Bill

NBD


yes, meter it, check the meter, meter it, check the source, meter it... I meter plain edison outlets if I havn't been there before.

[ProSoundWeb Community]